Supercritical impregnation is an attractive “clean” alternative to conventional soaking into liquid process, using generally organic solvents. Impregnation process can be used for the development of controlled delivery systems that can be applied in pharmaceutical and medical fields. This work focuses on the preparation of controlled drug delivery systems for ophthalmic applications through sup...

Anodes for solid oxide fuel cells (SOFCs) have been prepared by electrodeposition of either Co or Ni into a layer of porous yttria-stabilized zirconia (YSZ), 60 μm thick. The YSZ, having 65% porosity, was prepared by tape casting with graphite pore formers and was attached to the dense YSZ electrolyte. After adding 10 vol % CeO2 by impregnation of aqueous solutions of CeNO3)3, followed by calci...

Monometallic and bimetallic Ni and Co catalytic nanoparticles supported on Titanium dioxide (rutile phase) substrate were prepared by wet impregnation method. These nanoparicles were used as catalysts for synthesis of multiwalled carbon nanotubes (MWCNTs) from acetylene decomposition at 700°C by the catalytic chemical vapor deposition (CCVD) technique. The nanomaterials (catalyst and CNTs) were...

The catalytic oxidation of toluene over copper oxide supported on natural diatomite was investigated. The catalyst was prepared by the wet impregnation method and characterized by using the Brunauer Emmett Teller (BET), field emission Scanning Electron Microscopy (FESEM), X-ray diffraction (XRD), X-ray fluorescence (XRF) and Temperature-programmed reduction (TPR) analysis. The highest catalytic ...

The impregnation method was used to synthesize Pt and Pt3Co supported on MWCNTs applying NaBH4 as the reducing agent. The structure, morphology, and chemical composition of the electrocatalysts were characterized through SEM, XRD, and EDX. X-ray diffraction showed a good crystallinity of the supported Pt nanoparticles on the composites and showed the formation of Pt3<...

The impregnation method was used to synthesize Pt and Pt3Co supported on MWCNTs applying NaBH4 as the reducing agent. The structure, morphology, and chemical composition of the electrocatalysts were characterized through SEM, XRD, and EDX. X-ray diffraction showed a good crystallinity of the supported Pt nanoparticles on the composites and showed the formation of Pt3<...

the catalytic oxidation of toluene over copper oxide supported on natural diatomite was investigated. the catalyst was prepared by the wet impregnation method and characterized by using the brunauer emmett teller (bet), field emission scanning electron microscopy (fesem), x-ray diffraction (xrd), x-ray fluorescence (xrf) and temperature-programmed reduction (tpr) analysis. the highest catalytic ...

BTX compounds (Benzene, toluene and xylenes) are the main pollutants in air and fuels. Recent environmental legislations are limited the amount of these materials specially the amount of benzene in gasoline due to its carcinogen effects on health. In this research, the BTX hydrogenation was carried out using nanoparticles of Co supported on MWCNTs (multiwall carbon nanotubes) and AC (activated ...

A co-impregnation method was applied to the Ni/Zr-HMS/HZSM-5 catalyst (with various amounts of zirconium) during the hydrogenation of benzene. The physicochemical properties of the prepared nickel catalyst were characterized using X - ray diffraction, X - ray fluorescence, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, temperature-programmed desor...