Kenaf bast fiber (KBF) filled plasticized poly(lactic acid) (p-PLA) composites was prepared and examined stage by stage in this study. Firstly, poly(lactic acid) (PLA) was plasticized with 5 up to 20 wt% poly(ethylene glycol) (PEG) via internal mixer. Blend with 10 wt% PEG was chosen as matrix for composite as it showed the best impact strength and elongation at break. Secondly, maleic anhydrid...

The aim of this study was to investigate the feasibility of using nonmetallic printed circuit board (PCB) waste as filler in recycled HDPE (rHDPE) in production of rHDPE/PCB composites. Maleic anhydride modified linear low-density polyethylene (MAPE) was used as compatibilizer. In particular, the effects of nonmetallic PCB and MAPE on mechanical properties of the composites were assessed throug...

Polyethylene/nanoclay specimens containing from 0 to 5% nanoclays were prepared from a commercially available premixed PE/nanoclay masterbatch containing 50%wt of nanoclay. The masterbatch was diluted to the desired concentration by adding PE along with various amounts of compatibilizer in order to achieve the best possible dispersion of the nanoclay platelets. The dielectric response of the co...

in this research, high oxygen-barrier films were organized based on low-density polyethylene (ldpe)/ ethylene vinyl alcohol (evoh)/ polyethylene-grafted maleic anhydride (ldpe-g-ma) compatibilizer. the effects of 10–30 wt. % evoh and 0–10 wt. % ldpe-g-ma loadings on the properties of final films were evaluated. the morphology of specimens was observed by using scanning electron microscopy (sem)...

In this study, rice-straw (RS) filled high density polyethylene (HDPE) composites were manufactured by extrusion and injection molding. Three compatibilizers, which are unfunctionalized ethylene/propylene copolymer (uEPR), maleic anhydride grafted EPR (EPR-g-MA) and PE-g-MA, and their combinations were introduced to strengthen fibermatrix interphase. The mechanical and morphological properties ...

The aim of this study was to investigate the effect of coupling agent loading on the natural durability of wood flour/polypropylene composites against white-rot fungi (Trametes versicolor). The blend composites were prepared through the melt mixing of wood flour/polypropylene at 50% weight ratios, with various amounts of compatibilizer (0, 2 and 4 per hundred compounds (phc)) in hake internal m...

Organically modified clay was used as reinforcement for HDPE using maleated polyethylene (PEMA) as a compatibilizer. The effect of compatibilizer concentration on the orientation of various structural features in the polymer-layered silicate nanocomposite (PLSN) system was studied using two-dimensional (2D) small angle X-ray scattering (SAXS) and 2D wide-angle X-ray scattering (WAXS). The dispe...

This study presents the utilization of oil palm ash (OPA), a siliceous material from the fiber of oil palm biomass, as a nanofiller for the development of polymer nanocomposites. Polypropylene-based polymer nano-composites reinforced with OPA along with a compatibilizer were prepared by a melt-mixing technique, using a double screw extruder. Variations in the mechanical, morphological, and ther...

ABSTRACT: – The increasing awareness of environment, government has promoted great interest in selected waste collection and has attracted the interest of research groups to challenge of converting recycled plastic into useful products. Converting PET containing film laminate waste is studied to obtain a new material with enhanced properties. In present study different percentage of film lamina...

In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...