From nocturnal variations of the airglow O2 (01) and OH Meinel (6-2) band emission intensity and the rotational temperature, gravity waves and the damping effect in the MLT region were investigated. The data set was obtained from photometer measurements at Rikubetsu (43.5 N, 143.8 E), Japan, from March 2004 to August 2005. The ratio of the amplitude of oscillation and their phase difference bet...

In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....

this paper focuses on multi-objective designing of multi-machine thyristor controlled series compensator (tcsc) using strength pareto evolutionary algorithm (spea). the tcsc parameters designing problem is converted to an optimization problem with the multi-objective function including the desired damping factor and the desired damping ratio of the power system modes, which is solved by a spea ...

This paper focuses on multi-objective designing of multi-machine Thyristor Controlled Series Compensator (TCSC) using Strength Pareto Evolutionary Algorithm (SPEA). The TCSC parameters designing problem is converted to an optimization problem with the multi-objective function including the desired damping factor and the desired damping ratio of the power system modes, which is solved by a SPEA ...

The TESLA linear collider needs damping rings to achieve the required small transverse emittances for optimum luminosity. Due to the TESLA pulse structure the damping rings are about 17 km long. The resulting unusual ratio of circumference to energy leads to a large space charge tune shift. The originally proposed damping ring [1] has thus been redesigned for higher energy. This paper describes...

according to performance-based seismic design method by using energy concept, in this paper it is tried to investigate the duration and damping effects on elastic input energy due to strong ground motions. based on reliable iranian earthquake records in four types of soils, structures were analyzed and equivalent velocity spectra were computed by using input energy. these spectra were normalize...

OBJECTIVE To develop a modification of the pendulum test to allow evaluation of elbow spasticity. DESIGN The main difficulties of directly applying the conventional pendulum test to the elbow were the small inertia of the forearm and the uncomfortable posture. We designed an experimental apparatus similar to a clock pendulum and developed an elbow biomechanic model to measure objectively spas...

A novel control method of a three-phase PWM inverter with LC filter is proposed. The transfer function of LC filter is the same as that of 2nd order low pass filter(2nd LPF) which has a zero damping ratio. A simple method of implementing 2nd LPF with damping ratio is to add resistor to inductor or capacitor of LC filter. In an industrial application, it is not practical to adopt damping resisto...

Particle damping is a technique to reduce the structural vibrations by means of placing small metallic particles inside a cavity that is attached to the structure at location of high vibration amplitudes. In this paper, we have presented an analytical model to simulate the particle damping of two dimensional transient vibrations in structure operating under high centrifugal loads. The simulatio...

Measured damping coefficients of six different perforated micromechanical test structures are compared with damping coefficients given by published compact models. The motion of the perforated plates is almost translational, the surface shape is rectangular, and the perforation is uniform validating the assumptions made for compact models. In the structures, the perforation ratio varies from 24...