Heat transfer and fluid flow in a single-rib mounting channel were investigated by directly solving Navier-Stokes and energy equations. Flow and thermal fields were considered to be fully developed at the inlet of the channel, and the simulation was made for spatial advancement of turbulent heat transfer. Keeping the frictional Reynolds number, Reτ0, at 150, the rib height ratio was changed in ...

a theoretical solution is presented for the forced convection heat transfer of a viscoelastic fluid obeying the giesekus constitutive equation in a concentric annulus under steady state, laminar, and purely tangential flow. a relative rotational motion exists between the inner and the outer cylinders, which induces the flow. a constant temperature was set in both cylinders, in this study. the f...

In this paper, convection heat transfer of Al2O3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. For each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. The governing equations in...

The steady three-dimensional boundary layer flow and heat transfer of a dusty fluid towards a stretching sheet with convective boundary conditions is investigated by using similarity solution approach. The free stream along z-direction impinges on the stretching sheet to produce a flow with different velocity components. The governing equations are reduced into ordinary differential equations b...

The thermo-hydraulic behavior of the air flow over a two dimensional ribbed channel wasnumerically investigated in various rib-width ratio configurations (B/H=0.5-1.75) atdifferent Reynolds numbers, ranging from 6000 to 18000. The capability of differentturbulence models, including standard k-ε, RNG k-ε, standard k-ω, and SST k-ω, inpredicting the heat transfer rate was compared with the experi...

sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. but square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

An analysis of heat transfer in the flow of a viscous, in-compressible fluid along an infinite porous plate is presented when the plate is subjected to a transverse sinusoidal suction. The flow field becomes three-dimensional due to this type of suction velocity. Expressions for the flow and temperature fields are obtained by series expansion method. It is found during the course of discussion ...

This study deals with the three-dimensional flow of a chemically reacting magnetohydrodynamic Sisko fluid over a bidirectional stretching surface filled with the ferrous nanoparticles in the presence of non-uniform heat source/sink, nonlinear thermal radiation, and suction/injection. After applying the self-suitable similarity transforms, the nonlinear ordinary differential equations are solved...

This investigation is a three dimensional comprehensive heat transfer analysis for partially differentially heated enclosure with the vertical fin mounted on the hot wall. The thermal lattice Boltzmann based on D3Q19 method is utilized to illustrate the effects of vertical fins and nanoparticles on the flow and thermal fields. The effects of Rayleigh number and different arrangement of fins on ...