The purpose of this research paper is to examine the tribological characteristics and issues related to journal bearings under boundary and mixed lubrication conditions during shaft startup, shutdown, and low speeds. The key issues and problems related to journal bearings, most notably wear, are discussed as well as the subsequent issues created in the field. The mechanical analysis of the load...

URM (Unreinforced Masonry) historic buildings can be generally arranged into three categories: adobe, brick and stone masonry. However, a common feature of URM structures is typically the low mechanical properties of the masonry material, especially in terms of shear strength. URM buildings are not amenable to seismic analysis, and the relatively low strength of stone and brickwork masonry ofte...

This paper presents an alternative approach to the problem, based on ‘‘testing’’ the real structure rather than trying to model it. Experiments on reinforced concrete (RC) beams, representative of bridge beams, are described. The beams were loaded in cycles up to failure whilst recording the acoustic emissions (AE) generated. The analysis of the AE signals was then undertaken based on a propose...

In this paper, results from full-scale tests on a corrugated soil-steel flexible culvert for railway traffic are presented. The bridge was instrumented with strain gauges, accelerometers and displacement gauges, measuring the response from passing trains. The aim of the measurement campaign was to gain knowledge of the dynamic behaviour due to train induced vibrations, both of the bridge struct...

The results of a comprehensive pile load-test program and observations from field monitoring of helical piles with either a single helix or double helixes installed in oil sand are presented in this paper. Eleven full-scale pile load tests were carried out including axial compression, uplift, and lateral load tests. The results of the full-scale load tests are used to develop a theoretical desi...

g (EFR) is a form of geographical multirkload-balancing problem. However, it assumes that the -based routing protocols can be subject to various attacks. -based routing protocols. More -Pole Field Persistent Routing -effort, they can be highly destructive to s workload balanced operation. We present extensive

Design aids in the form of load tables or span are well known to engineers and commonly used timber steel design. Such reduce need for repetitive calculation allow easy ‘what-if’ queries during They also permit rapid communication minimum design requirements. This paper demonstrates an approach developing full culm bamboo elements compression flexure. The based on provisions ISO 22156:2021 most...

The purpose of the present study was to examine the validity of the KINOTEX sensor via comparison with an existing sensor and to determine the sensing areas for a new alternating-air mattress that incorporates an interface pressure-sensing system. The study design was an evaluation study to validate and determine the sensing area of the KINOTEX sensor in comparison with another sensor. Study pa...