Introduction Over the last fifty years gas-solids fluidized beds have played a very important role in many areas in the process industry, especially in chemical and petroleum industries. The existence of different flow regimes in fluidized beds at different operating conditions has been known for a long time and numerous studies have been carried out to define the flow regimes [1-6]. It is well...

We use a dynamic finite-difference model to simulate martian landslides in the Valles Marineris canyon system and Olympus Mons aureole using three different modal rheologies: frictional, Bingham, and power law. The frictional and Bingham modes are applied individually. Fluidized rheology is treated as a combination of frictional and power-law modes; general fluidization can include pore pressur...

Iron ore and coal are the two major important raw materials being used in Iron making industries. Usually ore fines containing around 5% Alumina are rejected due to higher proportion of alumina. Therefore, a technology or process which may reduce the alumina content by 2% by beneficiation process will be highly attractive . In addition fine coals with ash content is used nearly 12% is directly ...

Convection and fluidization phenomena in vibrated granular beds have attracted a strong interest from the physics community since the last decade of the past century. As early reported by Faraday, the convective flow of large inertia particles in vibrated beds exhibits enigmatic features such as frictional weakening and the unexpected influence of the interstitial gas. At sufficiently intense v...

In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using adsorption method. The experiments were carried out a column with diameter 45 mm spherical and non-spherical particles polypropylene polyethylene 3.3-4.9 density about 930 kg m-3. A diluted solution methylene blue used as fluidization medium, which adsorbed on part surface silica gel. obta...

A gas-liquid-solid inverse  uidization airlift bioreactor was proposed by combining advantages of external-loop airlift reactors and inverse  uidized beds. This airlift bioreactor comprises a gas-liquid riser, a gas separator, a liquid-solid inverse  uidized downcomer and a bottom connector. The effects of the gas velocity and the particle loading on the gas holdup in the riser and the liqui...

We report the simultaneous characterization of timeand force-dependent mechanical properties of adherent cells in the physiologically relevant regime of large forces. We used magnetic tweezers to apply forces to magnetic beads bound to the cytoskeleton, and recorded the resulting deformation (creep response). The creep response followed a weak power law at all force levels. Stress stiffening an...

We propose that data-symbolization methods derived from nonlinear dynamics and chaos theory can be useful for characterizing and monitoring patterns in fluidized-bed measurement signals. Data symbolization involves the discretization of a measurement signal into a limited set of values. In this discretized form, the measurements can be processed very efficiently to detect dynamic patterns that ...

The mixing behaviors of dry and wet granular materials in gas fluidized bed systems were investigated computationally using the combined Computational Fluid Dynamics and Discrete Element Method (CFD-DEM). Dry particles were observed to mix fairly rapidly during the fluidization process due to vigorous relative motions between particles induced by the flow of gas. In contrast, due to the presenc...

The surface relief gratings (SRGs) can be generated when azo-polymer films are exposed to laser beam interference as a result of mass migration. Despite considerable research effort over the past two decades this complex phenomenon remains incompletely understood. Here we show, for the first time, the athermal photofluidisation of azo-polysiloxane films exposed to 488 nm light, directly monitor...