a solid – liquid – gas, multiphase reactor, called inverse fluidized bed bioreactor (ifbbr) was used in this study for the treatment of starch industry wastewater of high organic content and acidic nature. mixed culture obtained from the sludge, taken from starch industry effluent treatment plant, was used as microorganisms. experiments were carried out in an inverse fluidized bed bioreacto...

ISSN 2277 5056 | © 2012 Bonfring Abstract--Fluidization is an operation in which solid particles are kept under suspension supported by the upward flow of liquid/gas phase. In classic fluidization the solids density are higher than the liquid, where as in Inverse fluidization the solids density are lower than that of continuous liquid phase. The phase holdup measurements in three phase classic/...

The paper investigates the dynamic behaviour of Inverse Fluidized Bed (IFB) for treatment petroleum wastewater using adsorbents date seed activated carbon (DSAC) and commercial coconut shell (CCAC). fluidization is downward flow technique, where density particles are less compared to liquid density. IFB wasexperimentally validated by analysing chemical oxygen demand (COD) removalefficiency, tot...

The present study attempts to summarize the salient characteristics of hydrodynamics behavior of inverse fluidized system, effect of particles properties, various phenomena that affect the fluidization like bubble formation, fluid velocity and its various uses in commercial scale by reviewing the previous literature. Governing mechanisms of inverse fluidization system and some heat and mass cor...

Introduction: One of the most important discoveries of the NEAR Shoemaker mission to Eros was the “ponds”, flat regions (relative to surrounding terrain) inside craters that exhibit a slightly bluer reflectance spectra than most of the asteroid [1]. Ponds have been interpreted as being composed of finer-grained material than the rest of the asteroid surface. Formation processes for ponds includ...

in order to study the fluidization behavior of grains, a laboratory fluidized bed dryer (fbd) was designed and developed. forward blade centrifugal fan with 1.5 kw electric motor, was selected to be used based on the highest pressure loss calculated at minimum fluidization condition and airflow rate at terminal velocity of the selected grains (paddy, soybean, millet and barley). the dryer was c...

Changes in fluidization behaviour of green peas particulates with change in moisture content during drying were investigated using a fluidized bed dryer. All drying experiments were conducted at 50 + 2 0C and 13 + 2 % RH using a heat pump dehumidifier system. Fluidization experiments were undertaken for the bedheights of 100, 80, 60 and 40 mm and at 10 moisture content levels. Fluidization beha...

An experimental study is conducted to determine the effect of different types of nanoparticles on the gas fluidization characteristics of nanoparticle agglomerates. Taking advantage of the extremely high porosity of the bed, optical techniques are used to visualize the flow behavior, as well as to measure the sizes of the fluidized nanoparticle agglomerates at the bed surface. Upon fluidizing 1...

Nanoparticles (NPs) are applied in a wide range of processes, and their use continues to increase. Fluidization is one of the best techniques available to disperse and process NPs. NPs cannot be fluidized individually; they fluidize as very porous agglomerates. The objective of this article is to review the developments in nanopowder fluidization. Often, it is needed to apply an assistance meth...