Laminar structures have a high post-buckling strength reserve. Cold-formed steel profiles can be taken as a set of thin plate elements. Therefore it is necessary to design this type of profiles taking into account that reserve of strength in post-local buckling modes of failure. The method normally used to design this type of structures is based on the Effective Width concept. The Effective Wid...

It is proposed to identify the behavior of steel beams prior to and after the inception of local buckling by using Digital Image Correlation. Full field measurements are used to evaluate kinematic and static fields for determining constitutive laws. It enables for the detection of local buckling inception and the evaluation of the postbuckled behavior. Constitutive models are tuned by using mea...

Corrugated web girders represent a new structural system emerged in the past two decades. The girder’s flanges provide the flexural strength of the girder with no contribution from the corrugated web which provides the girder’s shear capacity. Failure of the web occurs by steel yielding, web buckling or interactively between them. Lateral torsion and local flange buckling of corrugated web gird...

in this paper, a new analytical method is proposed to study the effect of crack and axial load on vibration behavior and stability of the cracked columns. using the local flexibility model, the crack has been simulated by a torsional spring with connecting two segments of column in crack location. by solving governing eigenvalue equation, the effect of crack parameters and axial load on the nat...

a closed form three-dimensional solution is presented for determination of the local buckling (cell buckling) load of the nanosheets. moreover, an expression is proposed for the effective 2d young’s modulus of the unit cell of the nanosheet. in this regard, a three-dimensional efficient space-frame-like geometrical model with angular and extensional compliances is considered to investigate stab...

For the first time, we report on methods to control and prevent polymer films from buckling. Buckled morphologies were created by thermally cycling or mechanically compressing a poly(dimethylsiloxane) substrate coated with a polyelectrolyte multilayer film. By variation of the dimensions of the surface topography relative to the buckling wavelength (e.g., pattern size is less than, equal to, an...

In the present study, the dynamic buckling of the graphene sheet coupled by a viscoelastic matrix was studied. In light of the simplicity of Eringen's non-local continuum theory to considering the nanoscale influences, this theory was employed. Equations of motion and boundary conditions were obtained using Mindlin plate theory by taking nonlinear strains of von Kármán and Hamilton's principle ...

One of the common failure modes of thin cylindrical shell subjected external pressure is buckling. The buckling pressure of these shell structures are dominantly affected by the geometrical imperfections present in the cylindrical shell which are very difficult to alleviate during manufacturing process. In this work, only three types of geometrical imperfection patterns are considered namely (a...

Sandwich construction is widely accepted as a method of construction especially in the aircraft industry. It is a type of stressed skin construction formed by bonding two thin faces to a thick core, the faces resist all of the applied edge loads and provide all or nearly all of the required rigidities, the core spaces the faces to increase cross section moment of inertia about common neutral ax...