Various phosphosilicate doped polypyrrole proton conductive thin films composite membranes were successfully prepared. Phosphosilicate obtained by sol-gel process mixing tetraethoxy silane with phosphoric acid at a molar ratio 1:5. The conductivity increased increasing both the content of gel and relative humidity. Temperature dependence showed Vogel-Tamman-Fulcher type behavior, indicating tha...

In this work, we prepared the nafion/montmorillonite/heteropolyacid nanocomposite membranes for direct methanol fuel cells (DMFCs). The analyses such as X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM) were conducted to characterize the filler dispersion and membrane structure in prepared nanocomposite membranes. XRD patterns of nafion-CsPW-MMT ...

Proton exchange membranes (PEMs) for polymer electrolyte fuel cells (PEFCs) have recently been developed by our original techniques of the γ-ray or electron-beam crosslinking and graft polymerization. Our additional main focus is the use of cylindrical damage in polymers produced by bombardment of high-energy ions, that is called a latent track. We are taking the approach using this ion track t...

Proton conductive individual channels through a PVDF matrix have been designed using the ion track grafting technique. The chosen polyelectrolyte, a sulfonated polystyrene (PSSA), has been radiografted all along the linear and cylindrical ion tracks of irradiated PVDF leading to the creation of privileged paths for proton conduction from the anode to the cathode without inducing any further por...

This paper examines polymer film morphology and several important properties of polyethylene-graft-sulfonated polyarylene ether sulfone (PE-g-s-PAES) proton exchange membranes (PEMs) for direct methanol fuel cell applications. Due to the extreme surface energy differences between a semi-crystalline and hydrophobic PE backbone and several amorphous and hydrophilic s-PAES side chains, the PE-g-s-...

New bionanocomposite proton exchange membranes were prepared from sulfonated polybenzimidazole (s-PBI) and various amounts of sulfonated ZnO/cellulose nanohybrids (ZnO/cellulose-SO3H). The use of ZnO/cellulose-SO3H compensates for the decrease in ion exchange capacity of membranes observed when non-sulfonated nano-fillers are utilized. The strong –SO3H/–SO<su...

The performance of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFC) is critically dependent on the selection of materials and optimization of individual components. A conventional high-temperature membrane electrode assembly (HT-MEA) primarily consists of a polybenzimidazole (PBI)-type membrane containing phosphoric acid and two gas diffusion electrodes (GDE), the anode and t...

Semiconducting-ionic conductors have been recently described as excellent electrolyte membranes for low-temperature operation solid oxide fuel cells (LT-SOFCs). In the present work, two new functional materials based on zinc oxide (ZnO)-a legacy material in semiconductors but exceptionally novel to solid state ionics-are developed as membranes in SOFCs for the first time. The proposed ZnO and Z...