In this study, montmorillonite clay was used as the adsorbent for the removal of Aniline Blue dye, from aqueous solution by the batch adsorption technique under different conditions. The maximum removal of aniline blue dye for initial dye concentration 20 mg/L was more than 95% at optimum conditions (pH=4.5, contact time=30 min, and adsorbent dosage=2 g/L). The data of this study were fitted wi...

background and purpose:organic dyes with a complex structure are often toxic, carcinogenic, mutagenic, non-biodegradation and stable in the environment and if released to the environment without treatment can endanger the environment and human health. the aim was to evaluate the performance nanoscalezero-valent iron (nzvi) in the removal of dye acid red 18 (ar18) from aqueous solutions. materia...

conclusions the uv/zno system has been found an effective process with 90.2% cod removal and 95.6% dye removal after 50 minutes treatment. materials and methods in this work, zno catalyst and mercury lamp (uv-c, 254 nm) have been applied for removal of the c.i. sulphur red 14 dye from aqueous environments. the influence of various parameters such as the amount of zno, initial dye concentration,...

In this research, the removal of malachite green dye from Textile Wastewaters using polyaniline coated onto sawdust (PAni/SD) has been investigated. Ammonium peroxodisulphate was used as chemical oxidant for polymerization of polyaniline directly on the surface of sawdust. The effects of some important parameters such as pH, initial concentration, sorbent dosage, exposure time and temperature o...

Abstract Background and purpose:The main objectives of this research were to evaluating the application of electrocoagulation process for 198 dye from the aqueous phase and determining the optimum operating conditions to the dye removal using aluminum and iron electrodes. Materials and Methods:The present study was conducted in bench-scale. The spectrophotometer DR 5000 was used to determine th...

introduction: dye removal from industrial wastewater has been considered as one of the most environmental issues. recently, new methods of treatment such as catalytic ozonation have been used to increase dye removal efficiency. so, the efficiency of catalytic ozonation by copper coated zeolite as a catalyst in the removal of reactive red 198 was investigated. materials & methods: in order to re...

Erythrosine B is widely used for dyeing in various applications, especially in the food industry, despite its already proved toxicity and carcinogenicity. Therefore, the purpose of this study is to evaluate the efficiency of the synthesis process of US/S2O8-2 in removing erythrosine B dye from aqueous solution. In this experimental study, the removal of erythros...