The objective of this work is to investigate the effects of current, pulse on time and pulse off time in Electro Discharge Machining performance on material removal rate and tool wear rate of Mg/SiCp metal matrix composites. In this work the Mg/SiCp metal matrix composite specimens were prepared by powder metallurgy route. ELEKTRA PLUS spark erosion machine was used for the purpose. Brass tool ...

It is one of the future trends to create materials in situ by laser additive manufacturing. AlSi7Mg/nano-SiCp composites were successfully prepared selective melting our previous study. After adding 2 wt% nano-SiC particles, tensile stress and strain increased 502.94 ± 6.40 MPa 10.64 1.06%, respectively. For first time present study, we systematically studied compared wear performance corrosion...

Metal matrix composite (MMC) technology can improve the service performance of matrix metals and alloys. Most magnesium alloy based MMCs are produced via a casting process, therefore the casting microstructures are of vital importance to their performance in service. The formation of microstructure during solidification of MMCs is mainly influenced by four factors: nucleation (or its absence) o...

Over the years, aluminum content in a vehicle part is increasing due to the needs to reduce weight as well as increase fuel efficiency. Most of the cast product in a vehicle part is mostly cast from A356 alloy. It is used because A356 alloy posses’excellent characteristics over other type of alloy such as cast ability, high weight-to-strength ratio, good corrosion resistance and good weld-abili...

Nano-SiC particulates (n-SiCp) reinforced Mg-8Al-1Sn (AT81) composites with different pre-oxidation parameters were fabricated by powder metallurgy (P/M) process combined with hot extrusion. The effects of pre-oxidization treatment of n-SiCp on the microstructure and tensile properties of 0.5 vol % n-SiCp/AT81 composites were investigated accordingly. The distribution of n-SiCp with different p...

In this study, corrosion behaviour of A356-10 vol.% SiC composites casted by gravity and squeeze casting is evaluated. For this purpose, prepared samples were immersed in HCl solution for 1h at open circuit potential. Tafel polarization and electrochemical impedance spectroscopy (EIS) were carried out to study the corrosion resistance of composites. The Tafel polarization and EIS studies of ...

The aim of this investigation is to optimize the process parameters obtain minimum corrosion rate and weight loss Al/SiCp metal matrix composites. A Taguchi based grey relation analysis was carried out. such as number hours dipped in 3% NaCl solution, vol.% SiCp aging at 170°C for were considered. working range each fixed on low rate. test out using relationship analysis. Three factor three lev...