The stability of a bimetallic Au–Pd/TiO2 catalyst was examined in a packed bed microreactor for the oxidation of cinnamyl alcohol dissolved in toluene. The catalyst was prepared by co-impregnation with a Au–Pd weight ratio of 1 : 19. Experiments were performed at 80–120 °C, oxygen concentration 0–100% and total pressure 4 bara. Principal products observed were cinnamaldehyde, 3-phenyl-1-propano...

Herein we investigate the use of CuO-ZnO-Al2O3 (CZA) with different solid acid catalysts (NH4ZSM-5, HZSM-5 or γ-Al2O3) for the production of dimethyl ether from syngas. It was found that of the solid acids, which are necessary for the dehydration function of the admixed system, the CZA/HZSM-5 bifunctional catalyst with a 0.25 acid fraction showed high stability over a continuous period of 212 h...

● Deactivation of Diesel Catalyst Abstract: The first diesel catalysts, introduced in 1970s for underground mining applications, were simple oxidation catalysts designed for conversion of CO and HC. These catalysts gradually evolved into the modern diesel oxidation catalysts, optimized for PM emission reduction. Future requirements for NOx emission reduction from diesel engines call for new cat...

This paper first describes an empirical model to characterize the deactivation of a catalyst used in the production of a specialty chemical based on actual plant data. This model is then used in a novel multiperiod MINLP optimization formulation that incorporates the empirical model in order to determine the optimal catalyst replacement policy and meet time varying product demand.

A highly active heterogeneous Pd-nanoparticle catalyst for the intramolecular addition of phenols to alkynes was developed and employed in a continuous flow reaction system. Running the reaction in flow mode revealed reaction kinetics, such as the activation energy and catalyst deactivation, and provides many potential practical advantages.

Fischer-Tropsch synthesis is a promising route for production of light olefins via CO hydrogenation over transition metals. Co is one of the most active metals for Fischer-Tropsch synthesis. Some different variables such as preparation parameters and operational factors can strongly affect the selectivity of Fischer-Tropsch synthesis toward the special products. In the case of preparat...

The variation of the supports on the Cu/SiO2 catalyst plays an important role in the catalytic performance for hydrogenation of dimethyl oxalate. The loss of silica in the form of tetramethoxysilane from the support under the reaction conditions is responsible for the deactivation of the Cu/SiO2 catalyst.