background: application of potassium ferrate is a chemical oxidation approach used for water and wastewater treatment. the aim of this study is to apply central composite design (ccd) and response surface methodology (rsm) to optimize potassium ferrate consumption in the treatment of wastewater from carpet industries. methods: samples in this experimental study were collected from wastewater, o...

This study presents biotreatment of textile wastewaters using electrocoagulation and ozone processes. Ozonation process gave better results than electrocoagulation process. For electrocoagulation, optimum working conditions were found as follows: pH, 6.5; electrode type, iron electrode; current density, 20 mA/cm2; and reaction time, 15 min. Under these circumstances, values determined for elect...

In this study, Reactive Black 5 (RB5) was removed from synthetic wastewater using Fenton's oxidation (FO) process. Experiments were conducted on the samples containing 100 and 200 mg l(-1) of RB5 to remove the dye toxicity. Seventy-five milligram per litre of RB5 caused 25% toxicity on 24-h born daphnids whereas 100 mg l(-1) of RB5 displayed 100% toxicity on Daphnia magna. The study was perform...

Background: Application of potassium ferrate is a chemical oxidation approach used for water and wastewater treatment. The aim of this study is to apply central composite design (CCD) and response surface methodology (RSM) to optimize potassium ferrate consumption in the treatment of wastewater from carpet industries. Methods: Samples in this experimental study were collected from wastewater...

The color removal of three reactive dyes in an aquatic system without priortreatment was studied. Selected commercial dyes were treated with NaC102 andUV as oxidation agents. Effects of nature of oxidant, temperature, pH ofsolutions, concentration of C107—, contact time of C102— and UV irradiation wereinvestigated. Optimal C102— concentration for color removal in the absence of UVirradiation wa...

Introduction: The most important environmental problem of automotive industries is the produced wastewater due to its various processes. The flocculation and coagulation along with chemical sequestration are among important processes for removing contaminants from wastewaters. The aim of this study is to investigate the efficiency of coagulation and flocculation process along with chemical sequ...

The electrochemical treatment of olive mill wastewaters (OMW) over boron-doped diamond (BDD) electrodes was investigated. A factorial design methodology was implemented to evaluate the statistically important operating parameters, amongst initial COD load (1000-5000 mg/L), treatment time (1-4h), current intensity (10-20A), initial pH (4-6) and the use of 500 mg/L H(2)O(2) as an additional oxida...