this paper discusses the control of flexible microgrids, consisting of a redox flow batteries (rfb) and a new power conditioning system (pcs) for the rfb. considering the importance of energy storage, this study is essential in power systems that are developed cautiously. rfb is connected to power system by a dc/dc or dc/ac converter to produce a dc voltage. it is very important that this conve...

This paper includes modeling and simulation of 180 MW units of pumped storage power plant with Variable speed machines. In this method, voltage source inverters are used instead of traditional cyclo-converters. This paper aims to control the voltage source inverters and maintain DC voltage at a constant value. AC/ DC/ AC converter is used in system configuration structure in order to control an...

This article shows the proposal of a linear–assisted converter or linear–&–switching hybrid converter with a constant switching frequency. The control loop of the system is based on the current–mode technique. The main disadvantage of a converter with current–mode control is the inherent instability of the loop when switch duty ratios are greater than 0.5. In order to make stable the proposed l...

This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains...

the monolithic catalytic converter is still the main pollution control device for modern vehicles in order to reach the ever-increasing legislative demands for low emission standards. the catalytic converters require a large expansion from the exhaust pipe to the front face of the monolith. unfortunately, packaging constraints often do not permit the use of long diffusers. hence, flow separatio...

In a wind power generator using doubly fed induction generator (DFIG), the three-phase pulse width modulation (PWM) voltage source converter (VSC) is used as grid side converter (GSC) and rotor side converter (RSC). The standard linear control laws proposed for GSC provides not only instablity against comparatively large-signal disturbances, but also the problem of stability due to uncertainty ...

Abstract: In many power factor correction applications, the power level can reach maximum value and sometimes the input voltage also will be too high. For high power and high voltage applications the inductor volume and weight is the major concern of the conventional boost converter. In this paper the two inductor boost converter is adopted which uses smaller inductors yielding high power densi...

This paper investigates a passive control method of a point absorbing wave energy converter by considering the displacement and velocity constraints under irregular waves in the time domain. A linear generator is used as a power take-off unit, and the equivalent damping force is optimized to improve the power production of the wave energy converter. The results from nonlinear and linear passive...

This paper deals with sliding mode control of converter and its application to distributed generation. Sliding mode control is used to control the voltage source converter in voltage or current control mode. Modeling and control of H bridge converter system using sliding mode control is proposed. Easily implemented sliding surfaces provide prominent dynamic characteristics against changes in th...