The dynamic and static yield stress of fresh cement mortar were measured in a rotational rheometer with a vane geometry using shear rate and shear stress-controlled protocols, respectively. Through a shear rate-controlled steady-state protocol, the equilibrium flow curve is measured and fitted with the Bingham model to obtain dynamic yield stress. A negative slope in the equilibrium flow curve,...

Indentation creep tests were performed on an Al-5.3mol% Mg solid-solution alloy to examine whether mechanical properties can be extracted accurately from a testpiece, as small as a rice grain. A conical diamond indenter was pressed into a test surface with a constant load F at temperatures ranging from 0.60 to 0.65 Tm (Tm: the absolute liquidus temperature). When the representative flow stress ...

Creep polycrystalline ice samples antifreeze glycopeptides re-accelerating or tertiary samples. Previous work grain-boundary migration consistent with this, as nucleation and growth of curves containing (AFGPs) creep that has shown obtained from the low concentrations of do not show the is found in pure ice that AFGPs inhibit in ice and the present results are tertiary creep is associated with ...

The effect of molecular weight on the viscoelastic performance of an advanced polymer (LaRC-SI) was investigated through the use of creep compliance tests. Testing consisted of short-term isothermal creep and recovery with the creep segments performed under constant load. The tests were conducted at three temperatures below the glass transition temperature of each material with different molec...