the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

Background: The short-time creep behavior for a series of biodegradable nanocomposites which is used as implantable device into body is a crucial factor. In the current paper, we aimed to study the effect of bioactive glass nanoparticles (BGn) on creep and creep-recovery behaviors of PLA/PCL blends at different given load and different applied temperatures. Method: A series of biodegradab...

The compressive creep and recovery of foam earplugs was studied at various applied stresses leading to different fi nal creep strains. Deformation was determined from digital videos of the earplugs via image processing software. Creep could not be modeled by a single exponential in time; creep approximated a power law in time. Nonlinear viscoelasticity was observed: creep compliance depends on ...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...

The 60 min creep data from National Type Evaluation Procedure (NTEP) tests performed at the National Institute of Standards and Technology (NIST) on 65 load cells have been analyzed in order to compare their creep and creep recovery responses, and to compare the 60 min creep with creep over shorter time periods. To facilitate this comparison the data were fitted to a multiple-term exponential e...

In the current study the nonlinear viscoelastic response of a polymer matrix composite under multiple creep/creep-recovery loading is presented. The influence of creep/creep-recovery multiple step loading in the overall strain response both viscoelastic and viscoplastic is examined and an attempt for modeling this behaviour is attempted. An increase in the parameters of nonlinearity is observed...

steady state creep of the alloy was in a thermodynamical steady state, (2) which configuration of the dislocation network was contributing to the creep strength, and (3) which change in the dislocation network was the cause of the creep recovery. Specimens were furnace-cooled under stress and then observed by transmission electron microscopy. The creep stress was reduced during the test and the...

In the process of heavy oil thermal recovery, the creep of strata can often be accelerated due to injection pressure, the temperature of steam, the structural characteristics of rock itself and other factors. However, the effect of creep in strata may cause various types of damage in underground mining, such as fracture or deformation of oil casings, and so on. The mechanism of fluid–structure ...

Isolated helical strips of cat portal vein were subjected to sudden stresses to produce immediate elastic extension followed by a slow plastoelastic extension or "creep." Recovery from this creep was evaluated by restretching with varying intervals between stretches. In appropriately stimulated vessels, significant creep recovery continues for periods in excess of 20 minutes. Both the rate and ...

the changes in viscoelastic properties of potatoes (tubuls agria) stored at 4 ˚c for 4 months were modeled and evaluated by using the creep-recovery test. cylindrical specimens with 15 mm in diameter and 35 mm long were used. the samples were allowed to deform gradually under the constant stress (110 kpa) for about 30 min. after removing the load, the sample recovery was registered. deformation...