نتایج جستجو برای: mechanical properties
تعداد نتایج: 1027336 فیلتر نتایج به سال:
mixing conditions of nbr/pvc nanocomposites such as mixing temperature, rotor speed and mixing time are determining parameters in rheological, mechanical and morphological properties of the compound. three levels were chosen for each parameter using design expert software via box-behnken method. the nanocomposite samples were melt-mixed in brabender internal mixer. the effect of various mixing ...
in this study, physical vapor deposition (pvd) ti-cr-n coatings were deposited at two different temperatures100 and 400ºc on hardened and tempered tool steel substrates. the influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and young’s modulus were evaluated. phase compositions were stu...
In this study, biodegradable kefiran-chitosan-nanocellulose blend films were developed and their physical, mechanical, barrier, thermal and structural properties determined. Results showed that adding nanocellulose had not any significant effect on the thickness, moisture content and water solubility. Also, water vapor permeability, tensile strength and lightness increased and the elongation at...
in this paper the influence of two different sizes of silica particles (micro-silica and nano-silica) was studied on mechanical properties of sulfur and sulfur composite. to improve the structural properties, sulfur was plasticized using dicyclopentadiene (dcpd) and methyl styrene (mst). plasticized sulfur composite was prepared by melt blending of plasticized sulfur and silica particles. the i...
new edible composite films formed from salep (orchis mascula) and 10%, 20%, and 30% (w/w) oleic acid were prepared by emulsification with the aim of improving the water vapor barrier and mechanical properties of the film. as oleic acid concentration increased up to 30% (w/w), oxygen permeability (27%), elongation at break (86%) and thickness (2%) of salep films increased significantly and the t...
چکیده ندارد.
the aim of this article is study of tool plunge depth (tpd) effects on mechanical properties of friction stir welding of aa1100 aluminium alloy to a441 aisi steel. for this purpose the 0.1, 0.2, 0.4, and 0.6 mm tpd selected and other welding parameters kept constant. the results shows that the frictional heat increases and stir zone grain size decreases with increasing tpd at both base metals. ...
nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. antimicrobial nanocomposite ldpe films containing zno nanoparticles at different concentrations (e.g. 1%, 3%, 5% and 3% nano-zno pulse 10% polyethylene grafted maleic anhydride (pe-g-ma), w/w pure ldpe), were p...
mixtures of mineral aggregate and modified sulfur, wherein the modified sulfur functions as a binder, are termed sulfur concretes or sulfur mortars depending on the form of the mineral aggregate. molten sulfur reacted with olefinic additive, at 130-140 ºc, and then mixed with preheated filler and aggregates. sulfur mortar samples were prepared by mixing 32 % molten sulfur, 10 % filler and 58 % ...
n-methylol dimethyl phosphonopropionamide (mdpa) is one of the most utilized fire resistant (fr) finishes for cotton fabrics, utilized as part of a formulation with trimethylol melamine (tmm) to acquire better crosslinking and enhanced fr properties. the system parameters of the finishing treatment were upgraded for better fr properties and low mechanical loss to the fabric by the response surf...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید