Radiative heat transfer is analyzed in participating media consisting of long cylindrical fibers with a diameter in the limit of geometrical optics. The absorption and scattering coefficients and the scattering phase function of the medium are determined based on the discrete-level medium geometry and optical properties of individual fibers. The fibers are assumed to be randomly oriented and po...

We investigated the fabrication of highly porous scaffolds made of three different materials [poly(propylene fumarate) (PPF) polymer, an ultra-short single-walled carbon nanotube (US-tube) nanocomposite, and a dodecylated US-tube (F-US-tube) nanocomposite] in order to evaluate the effects of material composition and porosity on scaffold pore structure, mechanical properties, and marrow stromal ...

In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...

Cortical bone has a hierarchical structure, spanning from the macrostructure at several millimeters or whole bone level, the microstructure at several hundred micrometers level, to the nanostructure at hydroxyapatite (HAp) crystals and collagen fibrils levels. The aim of the study is to understand the relationship between the HAp crystal orientation and the elastic modulus and the relationship ...

In this work, we demonstrate a simple and inexpensive way to fabricate porous Ti2AlC, one of the best studied materials from the MAX phase family, with controlled porosity and pore size. This was achieved by using NaCl as the pore former, which was dissolved after cold pressing but before pressureless sintering at 1400 C. Porous Ti2AlC samples with a volume fraction of porosity ranging from 10 ...

In this research, the influence of Bi nanoparticles addition on the high temperature superconductor BSCCO-2223 was studied. For this purpose, the samples were synthesized by the conventional sol-gel method. Then, the Bi nanoparticles with x= 0.00, 0.03, 0.06, 0.12wt% was added to BSCCO-2223. The structural characterization of all the samples was done by X-ray diffraction pattern (XRD). Also, th...

For this study we selected 20 drill cores covering a wide range of depths (400-3000 m), from 15 wells, that provide a reasonable coverage of the field. Only andesite, the largely predominant rock type in the field, was included in this sample. We measured bulk density, grain (solids) density, effective porosity and (matrix) permeability on a considerable number of specimens taken from the cores...

The linear thermal expansions (LTE) of bulk nanocrystalline ingot iron (BNII) at six directions on rolling plane and conventional polycrystalline ingot iron (CPII) at one direction were measured from liquid nitrogen temperature to 300 K. Although the volume fraction of grain boundary and residual strain of BNII are larger than those of CPII, LTE of BNII at the six measurement directions were le...

We have characterized both the direct current conductivity and morphology of a wide range of films made from bundled nanotubes, produced by a selection of commercial suppliers. The conductivity increases with increasing nanotube graphitization but decreases with increasing film porosity P and mean bundle diameter D . Computational studies show that the network conductivity is expected to scale ...

This paper studies thermal transport in nanoporous silicon with a significant specific surface area. First, the equilibrium molecular dynamics approach was used to obtain dependence of conductivity on Then, modified phonon kinetic theory-based developed analyze conductivity. Two models were evaluate mean free path porous materials. The first model approximates only area, and second one investig...