Problems of adherence of thermal protective coatings to aerospace structures have become important with their use on vehicles such as the space shuttle and for jet engine turbine blades. In these structures a dielectric coating which acts as a thermal barrier. is bonded to a conductive substrate. Failure of these coatings to adhere to the substrate can result in catastrophic failure of the vehi...

The degradation of SiO, coatings deposited on alloys by metal organic chemical vapour deposition (MOCVD) in sulphidizing high-temperature environments is determined by delamination and crack formation. With increasing water concentration during deposition, the crack density in silica decreases and the critical thickness for delamination of SiO, coatings increases. This improvement is supposed t...

The best way to reduce the degradation of metallic cultural heritage is through preventive conservation measures but, in many cases, it is not possible to obtain adequate environmental conditions, and it is necessary to apply coatings to the artefacts in order to protect them against corrosion. There is a continuous search in the metal conservation community for new and improved coatings that p...

While the traditional and popular realm of polymer synthesis is the liquid phase, the use of vapor-based techniques to deposit polymers has been met with increasing interest over the past decades. The perhaps most relevant example, the deposition of poly(p-xylylenes) via the Gorham process, has been of industrial use in the fabrication of isolating or protective coatings in electronics and biom...

A common ideology of the coatings industry is that performance of solventless architectural coatings must be poor since they lack conventional coalescing agents. Indeed, it is well established that useful protective coatings must possess below ambient minimum film formation temperatures (MFT or MFFT) for flow, leveling, and substrate adhesion, and reach a glass transition temperature (T,) well ...

Thin alumina films have found applications in electronic circuits and cutting tools and have been recently explored as protective coatings against high temperature oxidation, but these studies have been relatively rare. In this study, amorphous alumina films 3.5 pm thick were produced by reactive sputtering on Co-30Cr-6Al-0.5Y coatings, using a pure aluminum target in Ar + 0 2 atmosphere. Isoth...

In this study the effect of crystallite size reduction and microstructure on the electrochemical corrosion behavior of nanocrystalline nickel (NC Ni) were investigated using Tafel polarization and electrochemical impedance spectroscopy (EIS) measurements in 10 wt.% NaOH. NC Ni coatings were produced by direct current electrodeposition using chloride baths in presence and absence of saccharin as...

Coatings of specific materials in few atoms of thickness to several microns on certain substrate is the basic need of society and they attend the regular attention of scientific community working in different domains; decorative and protective coatings, transparent and insulating coatings, coating medical implants and surgical instruments, coatings for drug delivery and security purposes, ultra...