in this study, the radial distribution and gravimetric storage capacities of hydrogen on coronene (c24h12) and its si substituted forms, c24h12, c24-nsinh12 (n= 4-24), have been investigated at 298 k and 0.1 mpa (standard situation) using (n,v,t) monte carlo simulation by lennard-jones (lj) 12-6 potential. the results show that the increase of number of silicon substitution doesn’t have any eff...

A method is presented for determining innerand outer-electron radial density functions for two-electron systems by partitioning the fully correlated, two-electron, radial density function. This is applied to the helium isoelectronic series (Z = 1 to 10 and 100) and the critical nuclear charge system, which has the minimum charge for which the atomic system has at least one bound state, to separ...

This paper proposes a backward/forward sweep method to analyze the power flow in radial distribution systems. The distribution system has radial structure and high R/X ratios. So the newton-raphson and fast decoupled methods are failed with distribution system. The proposed method presents a load flow study using backward/forward sweep method, which is one of the most effective methods for the ...

The main contribution of this paper is: (i) proposing a new efficient and simple load flow method for balanced radial and meshed distribution systems, (ii) impact of load models, different X/R ratios, load growth and tolerance levels to check robustness of proposed load flow method, (iii) impact of number of loops on meshed distribution systems, (iv) Comparison of radial and mesh distribution f...

in studies done on porous burner, generally burners with axial flow are considered. in this paper, porous burners with radial and axial flow have been modeled numerically and results of radial and axial porous burners with equal fuel consumptions are compared. the mechanism used in combustion phenomenon is 15 stage mechanisms which predict the pollutions production precisely. the results show a...

regarding the nature of non-linear discrete placement, and in order to determine the optimal capacity of the substation, the goal in the present study will be a number of local optimum points. in this research, the problem of optimal placement posts to reduce power losses by considering distributed generation (dg). in formulating the objective function, geographical distribution density in the ...

in this paper, the impacts of installing superconducting fault current limiter (sfcl)in radial and loop power distribution system are evaluated to improve voltage sag in both cases of with and without distributed generations (dg). among various sfcls, the hybrid type with a superconducting element in parallel with a current limiting reactor (clr) is selected. this is more effective than resisto...

This paper reports on an efficient method of power flow analysis for solving balanced and unbalanced radial distribution systems. The radial distribution system is modelled as a series of interconnected single feeders. Using Kirchoff’s laws, a set of iterative power flow equations was developed to conduct the power flow studies. Due to the voltage dependency of loads in distribution systems, va...

Amethodology for the analysis of radial or weakly meshed distribution systems supplying voltage dependent loads is here developed. The solution process is iterative and, at each step, loads are simulated by means of impedances. Therefore, at each iteration, it is necessary to solve a network made up only of impedances; for this kind of network, all the voltages and currents can be expressed as ...

In distribution systems, in order to diminish power losses and keep voltage profiles within acceptable limits, network reconfiguration and capacitor placement are commonly used. In this paper, the Hybrid Shuffled Frog Leaping Algorithm (HSFLA) is used to optimize balanced and unbalanced radial distribution systems by means of a network reconfiguration and capacitor placement. High accuracy and ...