The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,...; even thou its also has week points like a low resistance to fire, weak against corros...

Abstract: mechanical properties of AISIH 13 hot-work tool steel have been studied. Cast samples made of the modified new steel were homogenized and austenitized at different conditions, followed by tempering at the specified temperature ranges. Hardness, red hardness, three point bending test and Charpy impact test were carried out to evaluate the mechanical properties together with characteriz...

In this study, 3-D finite element modeling of precision hard turning has been used to investigate the effects of cutting edge microgeometry on tool forces, temperatures and stresses in machining of AISI H13 steel using polycrystalline cubic boron nitrite (PCBN) inserts with two distinct edge preparations. Hard turning experiments were conducted to investigate the effects of cutting edge geometr...

In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...

The structural behavior fire-resistant steel is essential; fire-resistant steel is proven to have higher strength at elevated temperature than that of conventional steel. Also, the requirement of fire protection in the fire-resisting steel can be relaxed as compared with conventional steel structures. However, the design criteria for the application of the fire-resisting steel in steel columns ...

results of damage prediction in buildings can be used as a useful tool for managing and decreasing seismic risk of earthquakes. in this study, damage spectrum and c4.5 decision tree algorithm were utilized for damage prediction in steel buildings during earthquakes. in order to prepare the damage spectrum, steel buildings were modeled as a single-degree-of-freedom (sdof) system and time-history...

Welding hot-work tool steels, containing 0.3-0.6% of carbon, is difficult both because of the elevated carbon content and because of significant hardening resulted from large amounts of alloying elements. A development of welding technology, i.e. better quality of electrodes, modern welding devices, improved welding technologies and better steel quality, make welding of such steel types possibl...

In the present investigation, H13 tool steel has been deposited on copper alloy substrate using both CO2 and diode laser. A detailed parametric analysis has been carried out in order to find out optimum processing zone for coating defect free H13 tool steel on copper alloy substrate. Followed by parametric optimization, the microstructure and microhardness of the deposited clads have been evalu...

The drilling and riveting processes are widely used in the assembly of carrier rocket, which makes the efficiency and quality of drilling become the important factor affecting the assembly process. According to the problem existing in the drilling of thick stacked plate (thickness larger than 10mm) of carrier rocket, such as drill break, large noise and burr etc., experimental study of the infl...

B. Grizelj, J. Cumin, Mechanical engineering Faculty in Slavonski Brod, Slavonski Brod, Croatia D. Grizelj, Siemens, Zagreb, Croatia. This paper deals with the eff ects of technological parameters used in the V-die bending process, on the obtained product properties and dimensions. By variation of the tool geometry, several cases of steel sheet bending process are observed through the FEM simul...