In this paper procedures for estimating the sound absorption coefficient when the specimen has inherently low absorption are discussed. Examples of this include the measurement of the absorption coefficient of pavements, closed cell foams and other barrier materials whose absorption coefficient is nevertheless required, and the measurement of sound absorption of muffler components such as perfo...

Recent measurements of mass attenuation coefficients have identified the determination of the thickness of the absorbing specimen as the major limitation to the accuracy of the measurement. We present a technique for determining the mass attenuation coefficient with high accuracy. The technique uses the integral of the density along a column extending through the thickness of the absorber, whic...

This paper considers a minimax control problem over multiple packet dropping channels. The channel losses are assumed to be Bernoulli processes, and operate under the transmission control protocol (TCP); hence acknowledgments of control and measurement drops are available at each time. Under this setting, we obtain an output feedback minimax controller, which are implicitly dependent on rates o...

This paper investigates the use of capacitive proximity sensors as sources of contact-free feedback signal measurement for active vibration attenuation applications. An experimental laboratory device is introduced, which consists of a clamped cantilever beam and actuated by bonded piezoelectric actuators. A measurement model is created and experimentally verified for the assessment of beam tip ...

It is possible to determine properties of wood using microwave scanning techniques. The purpose of this study was to verify the measured values from a microwave imaging sensor. Attenuation and phase shift of an electromagnetic wave transmitted through birch wood were measured and compared with theoretical calculated values. A test piece with varying thickness was measured with a scanner based o...

OBJECTIVE We wanted to evaluate the performance of prospective electrocardiogram (ECG)-gated axial scans for assessing coronary stents as compared with retrospective ECG-gated helical scans. MATERIALS AND METHODS As for a vascular model of the coronary artery, a tube of approximately 2.5-mm inner diameter was adopted and as for stents, three (Bx-Velocity, Express2, and Micro Driver) different...

In positron emission tomography, transmission scans are used to correct the acquired data for the effect of photon attenuation. The noise present in the transmission measurement often has a significant effect on the signal to noise ratio of the final attenuation corrected image of the tracer distribution. This study evaluates the effect of different attenuation correction strategies on the perf...

This work deals with the single photon emission computed tomography (SPECT) reconstruction process. As a SPECT measurement also depends on unknown attenuation properties of the tissue, such a process is challenging. Furthermore, the given attenuation may not be a good approximation to the true attenuation field. Reasons are repositioning or movement of the patient such as relaxation during scan...

Water is naturally found in atmosphere in three major physical states as: liquid (rain, fog & clouds), solid (snow flakes, ice-crystals) & gaseous (water vapors). In any of the forms the occurrence of water causes hindrances in the path of radio waves in form of absorption & scattering leading to some loss in signal quality & quantity both which is quantified in terms of attenuation. Here we pr...