OBJECTIVE The aim of this study was to determine the effects of light intensity and type of light unit (quartztungsten-halogen [QTH] or light-emitting diode [LED]) on the hardening of various resin cements and a resin composite restorative. METHODS Disk specimens were prepared from 4 dual-cured resin cements (Variolink II, Calibra, Nexus 2 and RelyX ARC). Two QTH light-curing units (Visilux 2...

Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...

In the petroleum industry, one of the most serious problems encountered during cementing is the failure at the bonding interface. Many measures including casing-sand adhesion have been developed to improve cementing bond strength. However, due to the lack of detailed study of the technique, many questions remain. The primary goal of this study is to investigate the influence of casing-sand adhe...

The aim of this study is to assess how a wet environment curing affects the retention characteristics of mineral trioxide aggregate (MTA), and also to determine the time needed for curing. MTA obturations were carried out in perforated dentine slices and cured under different conditions (presence or absence of humidity and several time intervals). The obturations were then subjected to an incre...

OBJECTIVES To compare curing performance of a second generation LED curing light with a high power tungsten quartz halogen (QTH). METHODS A hybrid composite resin (Filtek Z 250, 3M, USA) was used as test material and cured using a second generation LED light (Translux Power Blue™, Heraus Kulzer ,Germany) or a very high power QTH light unit (EMS, Switzerland). A two split aluminum mold was use...