In order to compare and evaluate the atomization process occurring in several types of graphite furnaces for atomic absorption spectrometry, the authors estimated temporal variations in the gas temperature by using a two-line method under the assumption of a Bolzmann distribution. The atomization furnaces employed were a graphite tube, a graphite tube coated with pyrolitic carbon, a graphite tu...

low water-wettability and oxidation resistance of graphite have limited its application in carbon containing refractory castables. the aims of this study were improvement of water-wettability and the oxidation resistance of natural flaky graphite by applying an oxide coating on its surface. to develop the coating, magnesium aluminate spinel sol was formulated via a citrate-nitrate route and gra...

production of fe-c alloy powders by mechanical alloying was studied. fe and graphite elemental powdermixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. thestructural changes of powder particles during mechanical alloying were studied by x-ray diffractometery,scanning electron microscopy and microhardness measurements. for both compositions, mecha...

The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...

Diamond-like carbon (DLC) thin films used in this study were prepared with DC magnetron sputtering deposition. Silicon (100) wafers were used as the substrates onto which an RF bias was applied during the film deposition. For the nitrogen doped DLC films, a pure graphite target was used as the carbon source and nitrogen gas was introduced into the deposition chamber via a mass flow controller. ...

Yields of neutron-rich isotopes produced by fast neutron induced fission of U were measured at the ISOL set-up Production d Atomes Radioactifs Riches en Neutrons. A surface ion source was used to ionize selectively elements with low ionization potentials. In order to observe also the most n-rich isotopes, the identification was achieved by a combined measurement of band c-rays and b-delayed neu...

Graphite or plumbago is a crystalline form of carbon which occurs in nature as soft black masses or, less commonly, as crystals in igneous rocks: this natural graphite contains varying proportions of other minerals. Graphite is also made artificially from coke, and the best preparations of this kind are nearly pure carbon. This paper will deal with some of the effects of natural graphite, and t...

Remote filament-induced breakdown spectroscopy (R-FIBS) using ultrashort laser pulses was used to measure the carbon/clay ratios between three graphite composites of different hardness at a standoff distance of approximately 6 m. Measurements using R-FIBS and femtosecond laser-induced breakdown (fs-LIBS) reveal similar selectivity and ability to excite emission. Comparison of the two stand-off ...