An instrument for measuring the creep response of a material maintained under a controlled environment of temperature and vapor pressure is described. The temperature range of the instrument is 20-250 degrees C while the range of vapor pressure is 0-1 atm. Data are presented for tests conducted on this instrument with Nafion, a perfluorinated ionomer developed by DuPont and used as a membrane i...

The previously developed microprestress-solidification theory for concrete creep and shrinkage is generalized for the effect of temperature ~not exceeding 100°C!. The solidification model separates the viscoelasticity of the solid constituent, the cement gel, from the chemical aging of material caused by solidification of cement and characterized by the growth of volume fraction of hydration pr...

Demand for long-term reliability of electronic packaging has lead to a large number of studies on viscoplastic behavior of solder alloys. Various creep models for solder alloys have been proposed. They range from purely empirical to mechanism based models where dislocation motion and diffusion processes are taken into account. In this study, most commonly used creep models are compared with the...

This study investigates the effect of prefabricated fissures on creep mechanical strength and acoustic emission (AE) characteristics sandstone. Under same test conditions, indoor uniaxial compression AE tests were performed intact artificially fissured sandstone specimens using a rock rheometer PCI-? tester controlled with an RLJW-2000 microcomputer. The variation strain, long-term strength, nu...

The compressive creep and recovery of foam earplugs was studied at various applied stresses leading to different fi nal creep strains. Deformation was determined from digital videos of the earplugs via image processing software. Creep could not be modeled by a single exponential in time; creep approximated a power law in time. Nonlinear viscoelasticity was observed: creep compliance depends on ...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...

Fitting data to classical creep rupture models can result in unrealistically high extrapolated long-term strength. As a consequence, the standard strength values for new steel grades have frequently needed downward correction after obtaining more long-term test data. The reasons for non-conservative extrapolation include the influence of short-term data, which are easiest to produce but tend to...

It has been suggested that the endurance of cemented femoral reconstructions in total hip arthroplasty is affected by the creep of acrylic cement, but it is not known to what extent cement creeps under loading conditions in vivo, or how this affects load transfer. We have simulated the long-term creep properties of acrylic cement in finite-element models of femoral stem constructs and analysed ...