In this paper, the crack detection and depth ratio estimation method are presented in beamlikestructures using Elman Networks. For this purpose, by using the frequencies of modes asinput, crack depth ratio of each element was detected as output. Performance of the proposedmethod was evaluated by using three numerical scenarios of crack for fixed-simply supportedbeam consisting of a single crack...

In this study, the natural frequencies and mode shapes of beams without cracks and cracked Timoshenko beams is calculated with different boundary conditions using finite element method. The energy method is used to solve the equations. Hardness and softness matrices for Timoshenko beam without crack are obtained by solving the potential and kinetic energy equations. Then for investigation of cr...

The strength and deformation of full-scale adhesively bonded multi-material joints is studied in this paper. Four with a thick layer methyl methacrylate adhesive (MMA) have been manufactured shipyard conditions. In two specimens, cracks introduced at steel–adhesive composite–adhesive interfaces. One cracked one un-cracked specimen were subjected to quasi-static tensile testing; the remaining sp...

Reliability of rotating machinery has a significant relation with personal safety and economic efficiency. With the development of science and technology, the improvement of performance degradation of machinery becomes increasingly higher. Research of traditional reliability theory depends on failure data. Some lifetime data result in little or even no failure. For mechanical equipment, degrada...

the main objective of this study is to drive a simple solution for prediction of steel fiber reinforced concrete (sfrc) behavior under four point bending test (fpbt). in this model all the force components at the beam section (before and after cracking) are formulated by applying these assumptions: a bilinear elastic-perfectly plastic stress-strain response for concrete behavior in compression,...

The presented work introduces a numerical parametric study on the crack propagation direction under mixed-mode conditions (mode I + II). It is conducted for the geometry of an eccentric asymmetric fourpoint bending of a single edge notched beam specimen; various levels of mode-mixity are ensured by modifications in the crack length and crack eccentricity. The direction of crack propagation is e...

Three experiments were conducted to determine the effects of cattle age and dietary forage level on the utilization of corn fed whole or ground to feedlot cattle. In Exp. 1, 16 steers were used to investigate the effects of cattle age and corn processing on diet digestibility. Two cattle age categories were evaluated (weanling [254 +/- 20 kg BW] and yearling [477 +/- 29 kg BW]; eight steers per...

2014 The formation of a regular pattern of periodic cracked ridges on single crystal polydiacetylene films is described. Films thicker than a certain critical thickness are cracked while thinner ones are not. A model in the framework of linear elasticity theory is developed, which accounts for this transition as a function of the film thickness. J. Phys. France 50 (1989) 923-935 15 AVRIL 1989, ...

We develop in this Note a homogenization method to tackle the problem of a diffusion process through a cracked medium. We assume that the cracks are orthogonal to the surface of the material, where an incoming heat flux is applied. The cracks are supposed to be of depth 1, of small width, and periodically arranged. We show that the cracked surface of the domain induces a volume source term in t...