The mixolab, a rheological device developed recently, combines approved farinograph and amylograph test procedures. Analysing wheat flour composites with hemp, teff, or chia in terms of all three mentioned rheological methods, correspondence of farinograph, and amylograph versus mixolab features was examined by principal component analysis. The first two principal components, PC1 and PC2, expla...

*Correspondence: Seung-Bok Choi , Smart Structures and Systems Laboratory, Department of Mechanical Engineering, Inha University, Incheon 402-751, South Korea e-mail: [email protected] This study is concerned with an investigation of the plate-like iron particles based MR suspensions under the application of magnetic fields to ascertain the influence of particle size in the rheological perfor...

The rheological properties of acid hydrolyzed corn stover at high solids concentration (20-35 wt.%) were investigated using torque rheometry. These materials are yield stress fluids whose rheological properties can be well represented by the Bingham model. Yield stresses increase with increasing solids concentration and decrease with increasing hydrolysis reaction temperature, acid concentratio...

in this work, we studied the effect of carboxylic acid on the rheological properties of a high-alumina cement mortar (ch45) produced by the algerian firm refractal.the investigated properties are setting time, water consumption, electrical conductivity, ph, density and the compressive strength. the results show a setting time of about 200 min for the acid free, 180 min with 0.1 % of carboxylic ...

The influence of nanocellulose on oil well cement (OWC) properties is not known in detail, despite recent advances in nanocellulose technology and its related composite materials. The effect of cellulose nanofibers (CNFs) on flow, hydration, morphology, and strength of OWC was investigated using a range of spectroscopic methods coupled with rheological modelling and strength analysis. The Vom-B...

This study is carried out to explore the effect of nano materials (SiO2 & TiO2) on the physical and rheological properties of Bitumen. To achieve this goal, Nano materials are blended in bitumen in various percentages (0.3, 0.6, 0.9 and 1.2%). The physical and rheological properties of modified binders are characterized using a penetration, softening point, kinematic viscosity and a dynamic...

The vitreous humour (VH) is a complex biofluid that occupies a large portion of the eyeball between the lens and the retina, and exhibits non-Newtonian rheological properties that are key for its function in the eye. It is often possible to distinguish two different phases in VH, known as liquid and gel phases (Sebag J Eye 1: 254–262, 1987). In this work, we present a detailed rheological chara...

The main objective of this study was to investigate the rheology of mixed primary and secondary sludge and its dependency on solid content and temperature. Results of this study showed that the temperature and solid concentration are critical parameters affecting the mixed sludge rheology. It was found that the yield stress increases with an increase in the sludge solid content and decreases wi...

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...