behaviors of stress corrosion cracking (scc)in martensitic stainless steel(aisi 420) and low carbon austenitic stainless steel (aisi 316l) have been compared under different conditions of temperature, environment (mgcl2), and strain rate. the results show that decreasing strain rate has detrimental effect on mechanical properties of both steels, including their strength and ductility. fractogra...

in this work, effects of homogenization time of 3 to 13 h at 1200 °c on the grain refinement of as-cast aisi 301 stainless steel after different hot rolling conditions were investigated. the results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °c for 9 h followed by hot rolling at temperature range of 1000–1200 °c with strain of 0.8 and strai...

effect of small al additions, from 0.14% to 0.31% ai, on the hot deformation behavior of low carbon steels containing 1%cu-1.2%mn was investigated in the temperature range of 750-800•c over the strain rate range of 1o.3.1o.1s•1 by a hot compression testing machine. the flow curves obtained, exhibited typical characteristics of dynamic recovery type of softening mechanism, and the critical strai...

the current study conducted a finite element (fe) and experimental investigation on tubular channel angular pressing as a noble severe plastic deformation technique for producing ultrafine grained and nanostructure tubular components. to examine the effects of the tcap process on the strain distribution and deformation behavior, fe simulations were employed. the fe results demonstrated that equ...

Interfacial strain gradients in oxide epitaxial thin films provide an interesting opportunity to study flexoelectric effects and their potential applications. Oxide epitaxial thin films can exhibit giant and tunable flexoelectric effects, which are six or seven orders of magnitude larger than those in conventional bulk solids. The strain gradient in an oxide epitaxial thin film can generate an ...

Traction tests were performed on the bovine anterior cruciate ligament-bone complex at seven strain rates (0.1, 1, 5, 10, 20, 30, 40%/s). Corresponding stress-strain curves showed that, for a given strain level, the stress increased with the augmentation of the strain rate. This phenomenon was important since the stress increased by a factor of three between the tests performed at the lowest an...