AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...

Cadmium sulfide nanoparticles were grown using wet chemical method by dissolving the reactants of cadmium acetate and sodium sulfide in the presence of thioglycerol (TG) as capping agent in ethanol solvent. Different nanoparticle sizes and size distribution were obtained through varying the molarities of thioglycerol. At higher TG concentration, synthesis provides a nearly monodisperse nanopart...

Alkyd resins were prepared into four different sets by varying the percentage concentrationof the glycerol content. Various properties such as the viscosity, Surface drying time, solubilityand color of the alkyd resins were evaluated for the various sets. The alkyd resin with the highestglycerol content was the most viscous, brownish in color and having the highest molecularweight this is due t...

Stability properties (uniform stability/uniform asymptotic stability) of nonlinear time-varying systems are explored using positive semi-definite time-varying Lyapunov candidates whose derivative along trajectories is either non-positive or negative semi-definite. Once these positive semi-definite time-varying Lyapunov candidates are available, conditional stability properties on some specific ...

In this paper, exact closed-form solutions for displacement and stress components of thick-walled functionally graded (FG) spherical pressure vessels are presented. To this aim, linear variation of properties, as an important case of the known power-law function model is used to describe the FG material distribution in thickness direction. Unlike the pervious studies, the vessels can have arbit...

In this paper, the plates made of functionally graded material (FGM) with and without a crack are numerically simulated, employing the finite element method (FEM). The material property variations are defined to be fully continuous; therefore, the elements can be as small as required. For this purpose, variations of the material properties are applied in both the integration points and in the n...