The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also pre...

Very often, in order to optimized welded constructions, some of their parts are made of heterogeneous steels. For example, microalloyed steels are in use for cars chassis making and high alloyed steels for different constructions making. From that reason, it’s not rare to find welded joints between ferrite microalloyed and austenitic highalloyed steels. As a rule, these joints are welded by usi...

In order to clarify the role of different post-weld heat treatment processes in manufacturing process, welding tests, and finite element analysis (FEA) are carried out for 12C1MoV steel pipes. The simulated temperature field residual stress agree well with measured results, which indicates that simulation method is available. influence process parameters on reduction results further analyzed. I...

Braided wire stents demonstrate distinct characteristics compared to welded ones. In this study, both braided and welded wire stents with the same nominal dimensions were crimped inside a sheath and then deployed into a stenosed artery using finite element analysis. The braided wire stent was generated by overlapping wires to form crisscross shape. A welded wire stent was created by welding the...

In this study, the tensile strength, impact strength, and the hardness of the weld are determined. A criterion is proposed for describing the effect of residual stress on the weld mechanical properties. Dimensionless parameters such as Rya (the average of residual stress over the material yield strength), Rym (the maximum residual stress over the material yield strength), ...

A finite element scheme for simulation of welding residual stresses is presented in this paper. Detailed thermal and residual stress analyses for butt-welded and socket-welded pipes are performed using ANSYS and ABAQUS. The calculated distribution of axial stress and hoop stress at welded joint are validated against experimental results. Furthermore, residual stress relaxation under high amplit...