This work studies the use of gold (Au) and silver (Ag) nanoparticles in multicrystalline silicon (mc-Si) and copper-indium-gallium-diselenide (CIGS) solar cells. Au and Ag nanoparticles are deposited by spin-coating method, which is a simple and low cost process. The random distribution of nanoparticles by spin coating broadens the resonance wavelength of the transmittance. This broadening favo...

We have developed a surface-enhanced Raman scattering (SERS) nanosensor firstly for Ag ions and Ag nanoparticles detection based on 2-mercaptoisonicotinic acid (2MNA)-functionalized Au nanoparticles. Ag(+) can coordinate with 2MNA resutling in a variation of its SERS spectrum, which is used as a criterion to determine Ag(+) in a solution. This sensor exhibits a detection limit no more than 25 n...

TiO2 thin films and Ag/TiO2 nanoparticles were prepared by CVD and plasma bombardment method. XRD results showed the presence of Ag nanoparticles in TiO2 matrix. SEM image confirmed formation of Ag nanoparticles. XPS analysis was utilized to study the chemical state of the Ag/TiO2 nanostructure. Statistical surface analysis revealed that since there i...

A nanocomposite of silver nanoparticles/reduced graphene oxide (Ag/rGO) has been fabricated as a surface-enhanced Raman scattering (SERS) substrate owing to the large surface area and two-dimensional nanosheet structure of rGO. A facile and rapid microwave-assisted green route has been used for the formation of Ag nanoparticles and the reduction of graphene oxide simultaneously with L-arginine ...

We demonstrated a novel, simple, and low-cost method to fabricate silicon nanowire (SiNW) arrays and silicon nanohole (SiNH) arrays based on thin silver (Ag) film dewetting process combined with metal-assisted chemical etching. Ag mesh with holes and semispherical Ag nanoparticles can be prepared by simple thermal annealing of Ag thin film on a silicon substrate. Both the diameter and the distr...

Silver nanoparticles (Ag-NPs) have been successfully synthesized using ultrasound irradiation in the sodium alginate media. AgNO3 and ultrasound irradiation have been used as silver precursor and physical reducing agent to accelerate the synthesis of Ag-NPs. The presence of Ag-NPs can be detected from the changing color of the suspensions. The silver ion reduction was confirmed through the surf...

The plasma-assisted method was used to synthesize silver nanoparticles, and the growth process of nanoparticles (Ag-NPs) monitored in real time by localized surface plasmon resonance (LSPR) absorption spectroscopy. effect additives on synthesis Ag-NPs verified. It is found that addition isopropanol glucose can increase intensity reaction solution, promote Ag-NPs. In method, effectively improve ...

The increasing and wide application of silver nanoparticles (Ag NPs) has resulted in their appearance in wastewater. In consideration of their potential toxicity and environmental impacts, it is necessary to find effective technology for their removal from wastewater. Here, forward osmosis (FO) membrane was applied for Ag NPs removal from wastewater, and single and combined fouling of nanoparti...

Microwave absorbing property of composites containing Ag nanoparticles filled multiwalled carbon nanotube buckypaper (Ag-BP) has been investigated. Buckypaper doped with silver was prepared by direct dispersion and filtration method. From the low temperature resistivity measurement it was found that increasing doping level decreases the electrical conductivity of the buckypaper. 30 wt. % and 40...

Pullulan (PULL)/silver (Ag) nanoparticle composite nanospheres were prepared out of aqueous solutions using electrospray technique by controlling the concentration of PULL solution. Since pullulan is a water soluble and interesting natural polymer for many of its merits and good properties, it is one of the best materials for preparation of antibacterial material. Scanning electron microscopy (...