The purpose of this article is modal analysis of ionic polymer metal composite beams, then briefing the system to the unique parameters to help in up modeling of the actuator. In this paper at first using of Mathematical analysis and Closed form transfer function of cantilever beam dynamic response to the forces of different inputs (intensive and continuous) is calculated and for different type...

in this paper, the modified euler-bernoulli beam model is presented to examine the influence of surface elasticity and residual surface tension on the critical force of axial buckling of nanotubes in the presence of rotary inertia. an explicit solution is derived for the buckling loads of microscaled euler beams considering surface effects. the size-dependent buckling behavior of the nanotube d...

In this study, we have investigated the performance of liquid-environment FM-AFM with various cantilevers having different dimensions from theoretical and experimental aspects. The results show that reduction of the cantilever dimensions provides improvement in the minimum detectable force as long as the tip height is sufficiently long compared with the width of the cantilever. However, we also...

among the intermolecular interactions, the casimir and van der waals forces are the most important forces that highly affect the behavior of nanostructures. this paper studies the effect of such forces on the adhesion of cantilever freestanding nanostructures. the nanostructures are made of a freestanding nano-beam which is suspended between two upper and lower conductive surfaces. the linear s...

The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...

A method for identifying a piecewise-linear approximation to the nonlinear forces acting on a system is presented and demonstrated using response data from a micro cantilever beam. It is based on the Restoring Force Surface (RFS) method by Masri and Caughey, which is very attractive when initially testing a nonlinear system because it does not require the user to postulate a form for the nonlin...

To date, commercial atomic force microscopes have been optimized for measurements of forces perpendicular to the sample surface. In many applications, sensitive parallel force measurements are desirable. These can be obtained by positioning the cantilever with its long axis perpendicular to the sample: the so-called pendulum geometry. We present a compact optical beam deflection system which so...

Parallel frequency readout of an array of cantilevers is demonstrated using optical beam deflection with a single laser-diode pair. Multi-frequency addressing makes the individual nanomechanical response of each cantilever distinguishable within the received signal. Addressing is accomplished by exciting the array with the sum of all cantilever resonant frequencies. This technique requires cons...

Optical fibers possess many advantages such as small size, light weight and immunity to electro-magnetic interference that meet the sensing requirements to a large extent. In this investigation, a Mach-Zehnder interferometric optical fiber sensor is used to measure the dynamic strain of a vibrating cantilever beam. A 3 × 3 coupler is employed to demodulate the phase shift of the Mach-Zehnder in...

In this paper a novel RF MEMS cantilever type switch with low actuation voltage is presented. The cantilever beam of switch is supported by two L-shaped springs to reduce the spring constant. The switch is simulated using Intellisuite software. The actuation voltage of switch is achieved about 2 volt and the size of the switch is 110×60μm, that in compared with other electrostatic cantilever be...