Full-perovskite Pb0.87Ba0.1La0.02(Zr0.6Sn0.33Ti0.07)O3 (PBLZST) thin films were fabricated by a sol-gel method. These revealed both rhombohedral and tetragonal phases, as opposed to the full-tetragonal phase previously reported in ceramics. The fractions of tetragonal and rhombohedral phases are found to be strongly dependent on film thickness. The fraction of tetragonal grains increases with i...

ZnO nanoparticles were produced by flame spray pyrolysis (FSP) using zinc naphthenate as a precursor dissolved in toluene/acetonitrile (80/20 vol%). The particle properties were analyzed by XRD, BET, and HR-TEM. The sensing films were produced by mixing the particles into an organic paste composed of terpineol and ethyl cellulose as a vehicle binder and were fabricated by doctor-blade technique...

The microstructure and magnetic-structure development in magnetron-sputtered Co-22at%Cr thin films deposited on amorphous substrates has been examined systematically and in detail. It has been found that the initial deposit is amorphous up to a thickness of ~ 5 nm. By 10 nm thickness, a polycrystalline highly hcp c-axis textured (out of the film plane) microstructure is observed. At 50 nm thick...

In this work we present an experimental study of deviations from the classical Landau-Levich law in the problem of dip coating. Among the examined causes leading to deviations are the nature of the liquid-gas and liquid-solid interfaces. The thickness of the coating film created by withdrawal of a plate from a bath was measured gravimetrically over a wide range of capillary numbers for both smo...

The magnetic properties of a thin film consisting of an exchange-coupled [Co/Ni]2/NiFe multilayer has been studied as a function of the NiFe thickness by using Monte Carlo modeling and compared with experimental results of [Co/Ni]4/Co/NiFe multilayers. Both modeling and experiment showed that the NiFe thickness controls the effective anisotropy. The direction of the easy axis is determined by a...

A general theoretical calculation is described for predicting the interference effect in the sum frequency generation (SFG) spectra from a model thin-film system as a function of film thickness. The calculations were carried out for a three-layer thin film consisting of an organic monolayer, a dielectric thin film of variable thickness, and a gold substrate. This system comprises two sources of...

Ultrathin metamaterial layers are modeled by a homogeneous bi-anisotropic film to represent various kinds of broken symmetries in photonic nanostructures, and specifically in optical metamaterials and metasurfaces. Two algorithms were developed to obtain the electromagnetic (EM) wave response from a metasurface (direct solver) or the metasurface parameters from the EM wave response (inverse sol...

In the context of conjugated polymers, especially those of the poly (phenylenevinylene) (PPV) family, which are promising candidates as emission material in light emitting devices such as LEDs, field effect transistors and photovoltaic devices, we have, in the present study, prepared MEH-PPV [Poly [2- methoxy-5-(2’-ethyl-hexyloxy)-1,4-phenylen-evinylene] of low molecular weight and low polydisp...

This paper deals with the design and fabrication of a quartz-crystal resonator used in a thickness-monitor unit, measuring film thickness in a film-depositing system. A purpose-grown quartz crystal is cut to form the desired wafer. Two gold electrodes are deposited on both surfaces of the wafer to provide electrical contacts. The resonance frequency of the resonator, at room temperature, and th...