Highly ordered TiO2 nanorod arrays (NRAs) were directly grown on an F:SnO2 (FTO) substrate without any seed layer by hydrothermal route. For a larger surface area, the second-step hydrothermal treatment in hydrochloric acid was carried out to the as-prepared TiO2 NRAs. The results showed that the center portion of the TiO2 nanorods were dissolved in the etching solution to form a nanocave at th...

The fabrication of the 2D GaN-based photonic crystal structure at optical scales, a subμm scale in our case is very challenging. In our work, a double-etching method proved to be feasible to achieve the periodic GaN/air variation. The pattern was defined in a PMMA resist by electron-beam lithography and transferred to SiO2 by reactive ion etching (RIE) in a CF4 plasma and further into GaN by RI...

In this study, we present the detailed investigation of the influence of the etching medium (acidic or basic Piranha solutions) and the etching time on the morphology and surface relief of ultrafine grained (UFG) and coarse grained (CG) titanium. The surface relief and morphology have been studied by means of scanning electron microscopy (SEM), atomic force microscopy (AFM), and the spectral el...

Figure 1 . Anisotropic etching of graphite by H 2 -plasma. a–c) AFM images of pristine, 50 W plasma-etched, and 100 W plasma-etched graphite. Plasma etching was performed at 500 ° C for 2 h. Magnifi ed images for the marked areas are shown. d) Measured maximum etching rate of graphite at various etching temperatures. The plasma power was 100 W. Solid lines represent Lorentzian line shape fi ts....

To realize the nanofabrication of silicon surfaces using atomic force microscopy (AFM), we investigated the etching of mechanically processed oxide masks using potassium hydroxide (KOH) solution. The dependence of the KOH solution etching rate on the load and scanning density of the mechanical pre-processing was evaluated. Particular load ranges were found to increase the etching rate, and the ...

The effects of HF/NH4F, wet chemical etching on the morphology of individual surface fractures (indentations, scratches) and of an ensemble of surface fractures (ground surfaces) on fused silica glass has been characterized. For the individual surface fractures, a series of static or dynamic (sliding) Vickers and Brinnell indenters were used to create radial, lateral, Hertzian cone and trailing...

The main objective of this research is to develop a micro and nanogap structure using dry anisotropic etching –Reactive Ion EtchingRIE. Amorphous silicon material is used in the micro and nanogap structure and gold as electrode. The fabrication processes of the micro and nanostructure are based on conventional photolithography, wet etching for the Al pattern and wet etching for a-Si pattern usi...

Wet anisotropic etching based silicon micromachining is an important technique to fabricate freestanding (e.g. cantilever) and fixed (e.g. cavity) structures on different orientation silicon wafers for various applications in microelectromechanical systems (MEMS). {111} planes are the slowest etch rate plane in all kinds of anisotropic etchants and therefore, a prolonged etching always leads to...