Three-dimensional finite element models are developed to investigate the effects of both tensile load and uniform temperature load on the stresses in hybrid joints. During the solution of the problem, finite element method (FEM) is preferred, as this method is very suitable for solving many engineering problems. An aluminum sheet is bonded a composite sheet. Hybrid joints are designed from both...

An earthquake with the magnitude of 5.9 Mw occurred in Qeshm Island and Hormozgan province in November 27th 2005. 3D co-seismic deformation field caused by the earthquake are determined based on the ascending and descending interferograms and azimuth offsets. The peak to peak estimated displacement is about 10 cm in west, 69 cm in north and 22 cm in vertical directions. We apply strain analysis...

13  Abstract-In this study, the wok is carried out to analyzed, the stresses of plate with oblique hole with the Finite Element Analysis. Stress analysis of a series of flat plates with oblique holes subjected to axial tension has been carried out using the finite element method (FEM). Different plate hole diameter-width ratios, angles of hole obliquity have been considered to provide stress c...

An adhesive-bonded single lap joint is analyzed using a new fuzzy finite element model. In the model, Young’s moduli and Poisson’s ratios of the joint materials are taken as fuzzy numbers in order to take the uncertainty of the material properties into account. The fuzzy numbers are modeled using linear triangular membership functions. At a selected material point in the adhesive layer, the pos...

This paper aims to assess the application of Support Vector Machine (SVM) regression in order to analysis flexible pavements. To this end, 10000 Four-layer flexible pavement sections consisted of asphalt concrete layer, granular base layer, granular subbase layer, and subgrade soil were analyzed under the effect of standard axle loading using multi-layered elastic theory and pavement critical r...

In this research, optimization process of axisymmetric extrusion dies is proposed. Plastic zone is analyzed using finite element method in the Eulerian system with flow formulation. The die profiles are defined by Bezier curves with six control points. Two effective functions are considered in this research; standard deviation of the strain rate and the rate of energy consumption during extrusi...

Displacement finite element models of various beam theories have been developed traditionally using conventional finite element basis functions (i.e., cubic Hermite, equi-spaced Lagrange interpolation functions, or spectral/hp Legendre functions). Various finite element models of beams differ from each other in the choice of the interpolation functions used for the transverse deflection w, tota...

A finite strain element (FE)-based approach to element-free Galerkin (EFG) discretization is introduced, based on a number of simplifications and specialized techniques in the context Lagrangian kernel. In terms discretization, quadratic polynomial basis used, support determined from pre-assigned nodes for each quadrature point points coincide with centroids tetrahedra. Diffuse derivatives are ...