A multicomponent one-dimensional dynamic mathematical model for the reacting slurry systems with a change in gas flow rate due to the chemical reaction is developed. A change in gas flow rate caused by the chemical reaction is modeled using the overall gas mass balance. Thus, all relevant chemical species are included in the model. Linear first-order reaction kinetics is considered. The gas pha...

The way in which the triple bond in CO dissociates, a key reaction step in the Fischer-Tropsch (FT) reaction, is a subject of intense debate. Direct CO dissociation on a Co catalyst was probed by 12C16O/13C18O scrambling in the absence and presence of H2. The initial scrambling rate without H2 was significantly higher than the rate of CO consumption under CO hydrogenation conditions, which indi...

Fischer-Tropsch (FT) synthesis produces an aqueous stream containing light oxygenates as major by-product. The low carbon concentration of the organics makes its thermal recovery unprofitable. Thus, novel processes are needed to utilize this waste content. In work, phase reforming wastewater obtained from a 15 kWth plant was explored promising process produce hydrogen at mild temperatures. FT p...

The kinetic of Fischer-Tropsch synthesis over a co-precipitated Fe-Ce catalyst was investigated in a fixed bed micro reactor. Experimental conditions were varied as follow: reaction pressure 1-15bar, H¬¬¬2/CO feed ratio of 1-3 and space velocity of 3600-5400 h-1 at the temperature range of 270-310°C. 4 models according to the Langmuir-Hinshelwood-Hougen-Watson (LHHW) type rate equation were der...

The United States has the world s largest coal reserves and Montana the highest potential for mega-mine development. Consequently, a large-scale effort to convert coal to liquids (CTL) has been proposed to create a major source of domestic transportation fuels from coal, and some prominent Montanans want to be at the center of that effort. We calculate that the energy efficiency of the best exi...

Fischer-Tropsch synthesis is one of the most important catalytic reactions that convert the synthetic gas to light and heavy hydrocarbons. One of the main issues is selecting the type of reactor. The slurry bubble reactor is suitable choice for FischerTropsch synthesis because of its good qualification to transfer heat and mass, high durability of catalyst, low cost maintenance and repair. The ...

Kinetic modeling is an important issue, whose objective is the accurate determination of the rates of various reactions taking place in a reacting system. This issue is a pivotal element in the process design and development particularly for novel processes which are based on reactions taking place between various types of species. The Fischer Tropsch (FT) reactions have been used as the ki...

Introduction Hydrogenation of carbon monoxide to produce hydrocarbons, normally called Fischer-Tropsch synthesis (F-T synthesis), is one of the most important hydrogenation reactions due to its potential for the intermediate production of hydrocarbon fuels in the “postpetroleum” era. The reaction is favored at low-temperature and therefore reducing the particle size of the catalyst to several n...

For the effective production of hydrocarbon liquid fuel in the hydrocracking of the Fischer-Tropsch (FT) product, the catalytic performance of Pt-loaded catalysts with low Pt content was investigated using an autoclave at 250 °C, an initial H2 pressure of 0.5 MPa, and a reaction time of 1 h. A screening study using Pt-loaded catalysts with a Pt content of 0.1 wt. % indicated that zeolite suppor...