Disposal packages containing high heat generating spent nuclear fuels (SNF) require improved heat transfer to keep the peak cladding temperature from going above the tolerance limit. Filling the accessible void spaces between the container and the SNF with a high heat conducting metal is a potential solution. In metal casting, it is well known that a gap forms at the metal-mold interface due to...

zinc coating is formed by the heterogeneous assembly of the γ, γ1, δ, ζ and η phases whose mechanicalproperties greatly differ from each other. thermal strains resulting from large differences betweenthermal expansion coefficients are partially relaxed by the formation of a crack network. in order tomodel this phenomenon, initial hardness, thermal expansion coefficient αi and toughness (kic) of...

Copper samples, hot solder (eutectic) dipped and thermally aged, were cross-sectioned and placed in an environmental scanning electronic microscope (ESEM). While in the ESEM the samples were heated for approximately 2.5 h at 170 degrees C to stimulate the growth of additional Cu/Sn intermetallic compound. The intent of the study was to obtain a continuous real-time videotape record of the diffu...

AbstractIn this paper, we investigate effect of Fe–intermetallic compounds on plastic deformation of closed-cell composite Aluminum Foam as filler of thin-walled tubes. However, deformation of the Aluminum foam-filled thin-walled tubes as crushed-box will be presented in Part (II). Composite foams of AlSi7SiC3 and AlSi7SiC3-(Fe) as closed cell were synthesized by powder metallurgy foaming metho...

A method to produce nanoscale films of AuAlx and PtAlx, and their mesoporous elemental derivatives is described, and the morphology and optical properties of these coatings explored. The color of the AuAlx film is bright purple, in agreement with ab initio calculations and experimental observations for the compound AuAl2, but becomes black after de-alloying with NaOH. The film of PtAlx is silve...

In this work we compare the microstructures of intermetallic compounds (IMCs) in electrochemically stripped solder joints created by two different soldering methods (vapor phase soldering (VPS), and selective laser soldering with a CO2 laser). After the selective removal of the Sn phase with amperometry, the microstructure and structural composition of the IMC can be revealed in a detailed way,...

The elimination of the FexAly type phases was considered the solution to low ductility presented in aluminum-steel welded joints. Recently, the researches do not seek the suppression but the control of the thickness of these compounds. In this work, Al-Fe joints were manufactured by solid state and fusion welding, looking for controlling the formation of intermetallic comp...

the cold roll bonding of al on aisi 304l stainless steel was carried out to fabricate the al/304l/al clad sheet composites. the maximum bond strength of 20 n/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. the microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...