For solder based flip-chip assembly, the deposition of an under bump metallisation (UBM) layer onto the surface of the AI bondpads of the die is the first step in the wafer bumping process. The UBM is necessary, as the fragile AI pad has a tenacious oxide layer that cannot be soldered without the use of strong fluxes and a barrier layer is required to prevent dissolution of the bondpad into the...

Magnesium-based bulk metallic glass matrix composites (BMGMCs) have better plasticity than the corresponding bulk metallic glasses (BMGs); however, their strength and density are often compromised due to the fact that the effective reinforcement phase is mostly plastic heavy metal. For lightweight SiC-particle reinforced BMGMCs, interface wettability and the sharpness of the particles often red...

In this study, Ni–P–Fe2O3 composite was deposited on AISI 4140 steel using different concentrations of Fe2O3 ranging from 0.1 to 0.5 gr/lit in an electroless bath. The phase analysis and surface morphology the samples were characterized X-ray diffraction FESEM. corrosion behavior coated investigated a 3.5 wt. % NaCl solution through potentiodynamic polarization. results test show that adding in...

in this work the effects of various methods of agitation on the properties of electroless ni-p-mos2 composite coatings were investigated. magnetic stirring as well as purging the solution with gas (air, oxygen, nitrogen) were used. plating rate, chemical composition, mos2 distribution, and hardness of the deposit were measured. topography of coating was studied with metallography and scanning e...

Since the cutting tools used in machining process of super alloys are subjected to high cutting forces, accordingly tools life is reduced, therefore improvement in alloys machining and reducing cutting forces to achieve longer tools life is an essential necessity. In this research, the effect of changes in feed rate on cutting forces in machining process of nickel based super alloys is investig...

The importance of microscopic morphological control to metal electroand electroless deposition in several emerging technologies is discussed. The use of in situ optical probes of the morphological development of deposits is described. A number of these are reviewed to describe both the potential of each method and the available literature on studies of electroand electroless deposition. Include...

background: titanium (ti) implants are commonly coated with hydroxyapatite (ha). however, ha has some disadvantages such as brittleness, low tensile strength and fracture toughness. it is desirable to combine the excellent mechanical properties of zro2 and the chemical inertness of al2o3 with respect to the purpose of this project which was coating ti implants with ha-zro2-al2o3 to modify the s...

In this paper, we describe a novel approach for fabricating an optoelectrochemical microring array. The array was fabricated by coating individual optical fibers of 25-microm diameter with a 1-microm layer of gold nanoparticles via electroless gold deposition. A SAM layer around the individual gold-coated imaging fibers prevented electrical contact with neighboring ring electrodes. To achieve b...