existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...

Microstructural degradation is a predominant source of damage in polycrystalline alloys that are commonly used in diverse applications. For early diagnosis and prognosis of failures, it is essential to understand the mechanisms of damage growth specifically in the crack initiation phase, which is still an intriguing phenomenon for scientists due to sensing inaccuracies and modeling uncertaintie...

Understanding crack growth behavior in engineering components subjected to cyclic fatigue loadings is necessary for design and maintenance purpose. Fatigue crack growth (FCG) rate strongly depends on the applied loading characteristics in a nonlinear manner, and when the mechanical loadings combine with environmental attacks, this dependency will be more complicated. Since, the experimental inv...

An efficient and highly accurate, Symmetric Galerkin Boundary Element Method Finite Element Method based alternating method, for the analysis of three-dimensional non-planar cracks, and their growth, in structural components of complicated geometries, is proposed. The crack is modeled by the symmetric Galerkin boundary element method, as a distribution of displacement discontinuities, as if in ...

Abstract Fatigue crack growth of austenitic and martensitic NiTi shape memory alloys was analyzed, with the purpose capturing effects distinct stress-induced transformation mechanics in two crystal structures. Mode I experiments were carried out, near-crack-tip displacements captured by in-situ digital image correlation (DIC). A special fitting procedure, based on William’s solution, used to es...

An assessment of the plasticity-induced crack-closure concept is made, in light of some of the questions that have been raised on the validity of the concept, and the assumptions that have been made concerning crack-tip damage below the crack-opening stress. The impact of using other crack-tip parameters, such as the cyclic crack-tip displacement, to model crack-growth rate behavior was studied...

In this work, XFEM is employed to obtain the stress intensity factors (SIFs) of a semi elliptical part through thickness axial crack. In XFEM, additional functions are employed to enrich the displacement approximation using partition of unity approach. Level set functions are approximated using higher order shape functions in the crack front elements to ensure the accurate modeling of the crack...

in this paper, a crack localization method for euler-bernoulli beams via an efficient static data based indicator is proposed. the crack in beams is simulated here using a triangular variation in the stiffness. static responses of a beam are obtained by the finite element modeling. in order to reduce the computational cost of damage detection method, the beam deflection is fitted through a poly...