Nanoporous carbon is coated by pure nickel via an electroless plating method. The nanoporous carbon provides a high-surface-area substrate, leading to a large capacitance; the nickel surface layer is of a high work function, resulting in a thermally sensitive electrode potential. Such a system is ideal for thermally chargeable supercapacitor (TCS) system, which converts low-grade heat (LGH) to ...

A low-cost, solution-processed, versatile, microfluidic approach is developed for patterning structures of highly conductive metals (e.g., copper, silver, and nickel) on chemically modified flexible polyethylene terephthalate thin films by in situ polymer-assisted electroless metal deposition. This method has significantly lowered the consumption of catalyst as well as the metal plating solution.

The loss at 210-280 GHz of room temperature waveguides plated with BDT 200 bright gold and Pur-A-Gold 125 soft gold is within ~10% of the theoretical loss based on the DC conductivity of pure gold and the classical skin effect. This is not the case for some other types of gold plating meeting the same ASTM (or MIL) specs but in which a trace of nickel is used as a brightener. Introduction Follo...

A novel route to fabricate nano-fiber anode material for solid oxide fuel cells (SOFCs) is presented. Firstly, uniform nano-fibers of 8 mol % Yttria Stabilized Zirconia (8YSZ) were formed in an electrospinning process; then, these electrospun fibers were calcined at temperatures up to 1300 °C; and finally the ceramic 8YSZ nano-fibers were coated with nickel in an electroless plating process. Th...

Nickel thin films have been electrodeposited without the use of an additional seed layer, on highly doped silicon wafers. These substrates conduct sufficiently well to allow deposition using a peripherical electrical contact on the wafer. Films 2 μm thick have been deposited using a nickel sulfamate bath on both n+and p+-type silicon wafers, where a series of trenches with different widths had ...

Nickel-tungsten alloys were electrodeposited on stationary working electrodes from a nickel sulfate, sodium tungstate, and tri-sodium citrate-based bath under different operating conditions. The microstructure of the deposits was studied by X-ray diffraction, the morphology by scanning electron microscopy and atomic force microscopy, and the approximate composition by energy dispersive spectros...

introduction:. nickel (ni) is one of the toxic heavy metals that exposure to it has been connected with chronic respiratory complications such as asthma, chronic bronchitis, lung cancer and heart diseases .. in this research,  original studies that investigated occupational or environmental exposures to nickel and  measured nickel levels in human tissues was reviewed. materials and methods: in ...

Nickel is the major cause of allergic contact dermatitis in the general population, both among children and adults, as well as in large occupational groups. This metal is used in numerous industrial and consumer products, including stainless steel, magnets, metal plating, coinage, and special alloys, and is therefore almost impossible to completely avoid in daily life. Nickel contact dermatitis...