Resin bonding to zirconia cannot be established from standard methods that are currently utilized in conventional silica-based dental ceramics. The solution-gelatin (sol-gel) process is a well developed silica-coating technique used to modify the surface of nonsilica-based ceramics. Here, we use this technique to improve resin bonding to zirconia, which we compared to zirconia surfaces treated ...

Nano-sized NiFe2O4 powders were synthesized by sol–gel auto-combustion method using pH values from 7 to 9 in the sol. The effect of pH variations on complexing behavior of the species in the sol has been explained. Changes in phase constituents, microstructure and magnetic properties by changes in pH values were evaluated by X-ray diffraction (XRD), field emission scanning electron micros...

Thickness mode piezoelectric micro-electromechanical system (MEMS) ultrasound transducers, operating in the 50-75 MHz range, have been fabricated using a composite sol gel technique in combination with wet etching. The composite sol gel technique involves producing a PZT powder/sol composite slurry, which when spun down yields films a few micrometers thick. Repeated layering, and infiltration, ...

Cerium orthovanadate nanoparticles (CeVO4 NPs) were fabricated using urea-assisted facile sol-gel auto combustion method. X-ray diffraction (XRD) pattern revealed the crystal planes and size of synthesized CeVO4 NPs. The morphological shape and the crystalline nature of the NPs were examined by field emission scanning electron microscopy (FESEM). Energy-dispersive X-ray spectroscopy (EDX) affir...

the Sol–gel nanocomposite coatings have been investigated for copper metal as a potential replacement for the hazardous and banned hexavalent chromate conversion coatings. TiO2–CdO nanocomposite thin films were deposited on copper using the sol–gel method. The sol-gel coatings were prepared using a sol obtained by the hydrolysis and condensation of tetra-o-butyl titanate. They were doped with c...

Optical characterization of lead chloride crystals prepared by sol-gel method is reported. The relevant sol-gel technique is used for the preparation of PbCl2 samples with five different types. In this paper, we report the absorption and fluorescence behaviour of pure, UV& IR irradiated and electric & magnetic field applied lead chloride crystal samples in solution phase at two different concen...

highly crystalline bi3+-doped cadmium oxide (cdo) sub-micron structures were synthesized by calcination the obtained precursor from a sol-gel reaction. the reaction was carried out with cadmium nitrate (cd(no3)2.4h2o), bismuth nitrate (bi(no3)3.5h2o) and ethylene glycol (c2h6o2) reactants without any additives at 80°c for 2h. resulting gel was calcined at 900 °c with increasing temperature rate...

zinc ferrite (znfe2o4) nanoparticles were synthesized via the auto-combustion assisted sol-gel method of zn2+ and fe3+ ions (molar ratio 1:2) in ammonia solution. the prepared nanomagnetic catalyst was characterized by ir, xrd, sem and icp. the diameter of the znfe2o4 mnps (63.7 nm) was determined by debye-scherre equation via their xrd pattern. nanomagnetic znfe2o4 efficiently catalyzes oxidat...