A gap with variable geometry is presented for both cantilever beam and fixed-fixed beam actuators as a method to reduce the pull-in voltage while maintaining a required displacement. The method is applicable to beams oriented either in a plane parallel to or perpendicular to a substrate, but is most suitable for vertically oriented (lateral) beams fabricated with a high aspect ratio process whe...

a relationship based on the modified couple stress theory is developed to investigate the flexural sensitivity of an atomic force microscope (afm) with assembled cantilever probe (acp). this acp comprises a horizontal cantilever, two vertical extensions and two tips located at the free ends of the extensions which form a caliper. an approximate solution to the flexural vibration problem is obta...

the most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy by the effect of coupling between electric fields and mechanical variables. using piezoelectric cantilevers is the most common method for vibration energy harvesting. changing the shape of the cantilevers can lead to changing the generated output v...

the pseudo-elastic behavior of shape memory alloy (sma) truss and cantilever beam are investigated. brinson’s one-dimensional material model, which uses the twinned and detwinned martensite fractions separately as internal variables, is applied in the algorithm to establish the sma stress-strain characteristics. this material model also incorporates different young’s modulus for austenitic and ...

Magnetic microactuation systems of torsion silicon cantilever is described. Devices are constructed in a batch fabrication process which combines electroplating with conventional photolithography , materials, and equipment. The magnetic transducers are applied to generation of motion in micromechanical structures such as cantilever, beam, membrane. Microelectromechanical systems (MEMS) with mag...

The purpose of this article is modal analysis of ionic polymer metal composite beams, then briefing the system to the unique parameters to help in up modeling of the actuator. In this paper at first using of Mathematical analysis and Closed form transfer function of cantilever beam dynamic response to the forces of different inputs (intensive and continuous) is calculated and for different type...

in this paper, the modified euler-bernoulli beam model is presented to examine the influence of surface elasticity and residual surface tension on the critical force of axial buckling of nanotubes in the presence of rotary inertia. an explicit solution is derived for the buckling loads of microscaled euler beams considering surface effects. the size-dependent buckling behavior of the nanotube d...

In this study, we have investigated the performance of liquid-environment FM-AFM with various cantilevers having different dimensions from theoretical and experimental aspects. The results show that reduction of the cantilever dimensions provides improvement in the minimum detectable force as long as the tip height is sufficiently long compared with the width of the cantilever. However, we also...

among the intermolecular interactions, the casimir and van der waals forces are the most important forces that highly affect the behavior of nanostructures. this paper studies the effect of such forces on the adhesion of cantilever freestanding nanostructures. the nanostructures are made of a freestanding nano-beam which is suspended between two upper and lower conductive surfaces. the linear s...

The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...