This study investigated the feasibility of Date-palm) Phoenix dactylifera (Leaf Ash (DLA) (an inexpensive agricultural-byproduct) as an application to adsorb Pb(II) ions. An adsorption process was carried out to evaluate initial concentration Pb(II) ions, adsorbent dose, contact time, pH and temperature on the systematic removal of Pb(II). The effects were examined and results showed that remov...

experiments were set up to estimate the effectiveness of clinoptilolite for the removal ofarsenate from aqueous solutions. the removal of arsenate by the exchanged forms was analyzed in thelight of the langmuir model of adsorption. a kinetic study of adsorption was carried out at differentintervals of time, and the kad values were calculated by using lagergren’s equation. adsorption ofarsenate ...

fe3o4 magnetic nanoparticles modified with 1-octyl-3-methylimidazolium bromide([c8mim]-fe3o4) were used for the removal of reactive red 141 (rr141) and reactive yellow 81 (ry81) as model azo dyes from aqueous solution. the mean size and the surface morphology of the nanoparticles were characterized by tem, xrd and ftir techniques. adsorption studies of two dyes were performed under different ex...

Adsorption of p-Nitrophenol by three different activated carbons (F100, S.E.I. and B.D.H.) was carried out at 301 K and at controlled pH conditions. Two different adsorption models (Langmuir model and Freundlich model) were studied and compared. The adsorption capacity of the carbons depends on the Point of Zero Charge (PZC) and surface area of the carbons. Adsorption of the solute at higher pH...

the used activated carbon was derived from pine-cone and was used for the removal of acid black 1(ab1) and acid blue 113(ab113) dyes. a batch sorption study was carried out in order to obtain optimum isotherm model. the study showed the best fit of the adsorption isotherm data was obtained using the langmuir model for both dyes. the monolayer maximum saturation capacities of ab1 and ab113 dyes ...

background dyes are one of the most important industrial pollutants, especially in textile industries. many methods have been proposed in order to remove color from wastewater among which, adsorption is more acceptable due to the ability for its use in the large scale. objectives the objective of this study was to investigate pumice as an inexpensive adsorbent for removal of methylene blue from...

the work focuses on the removing of cu(ii) from aqueous solution by linde f(k) zeolite. the zeolite is synthesized from fly ash by hydrothermal process. the adsorption experiments discuss several factors including the optimal solution ph, zeolite dosage, adsorption temperature, adsorption kinetics and adsorption isotherm equation. the results show that, the optimal solution ph is 6 and the effi...

a novel composite adsorbent, silica aerogel activated carbon was synthesized by sol-gel process atambient pressure drying method. the composite was characterized by fourier transform infraredspectroscopy (ft-ir), scanning electron microscopy (sem), differential scanning calorimetry(dsc) and nitrogen adsorption / desorption isotherms (bet).in the present study, the mentioned adsorbent was used m...

in this research, graphene oxide- gold nanoparticles (aunp/go) were easily fabricated by a redox reaction between go and chloroauric acid without using any additional reductant and then used to stabilize pickering emulsions. (aunp/go) was investigated by ft-ir spectroscopy. the changes of parameters such as contact time, ph, amoxicillin initial concentration and temperature were tested and inve...

In this study, bimodal meso-porous silica (UVM-7) synthesized and fabricated amino silane modified supports were characterized by powder X-ray diffraction (XRD), N2 adsorption/desorption, transmission electron microscope (TEM), elemental analysis and titration. Capacity of CO2 capture on modified bimodal pore structure silica at 70°C was calculated using breakthrough curves; and it was found th...