An investigation was conducted on the adsorption of oxymatrine (OMT) on a spherical cellulose adsorbent embedded with wattle bark tannin. The results showed that the adsorption of the OMT on the adsorbent was solution pH dependent and the adsorption process followed the Freundlich adsorption isotherm. The adsorption kinetics of the OMT on the adsorbent could be well described by the pseudo-seco...

Adsorption of violet B azo dye from aqueous solutions was studied by different cellulose agricultural waste materials (almond shell (AS), pistachio shell (PS), walnut shell (WS), Tea waste (TW) and orange peel (OP)). Cellulose agriculturalwaste sorbents characterized by FTIR and SEM methods. The effects of different parameters such as contact time, pH, adsorbent dosage and initial dye concentra...

Massive amounts of agricultural and industrial water worldwide are polluted by different types of contaminants that harm the environment and impact human health. Removing the contaminants from effluents by adsorbent materials made from abundant, inexpensive polysaccharides is a feasible approach to deal with this problem. In this research, alginate beads combined with two types of cellulose, st...

The contamination of foods and feeds is a significant problem in worldwide. Mycotoxins are secondary metabolites of fungi, particularly by many species of Aspergillus, Fusarium, Penicillium, Claviceps and Alternaria in many agricultural crops, especially in cereals and most oilseeds. Aflatoxins, ochratoxins, trichothecenes, zearelenone and fumonisins are the mycotoxins of greatest agro-economic...

In this study, a performance evaluation of an aluminium oxide modified onion skin waste (Al2O3/OSW) for the removal heavy metal ions (Pb2+ and Cd2+) from aqueous solution was investigated under batch mode adsorption. The surface morphology, elemental composition, functional groups, textural characteristics charge as-made Al2O3/OSW adsorbent were examined using SEM, EDX, FTIR, BET area pHpzc tec...

Effluent from the textile industry contains toxic compounds. These compounds contaminate the surface water, thereby making it unfit for irrigation and drinking. Since farmers use water from the rivers for agricultural purposes and the residents of the town, use both the surface and underground water from the same area as potable water, it is quite unsafe to discharge this effluent into water bo...

Silanized-glass-particle adsorbent capacities are extracted from adsorption isotherms of human serum albumin (HSA, 66 kDa), immunoglobulin G (IgG, 160 kDa), fibrinogen (Fib, 341 kDa), and immunoglobulin M (IgM, 1000 kDa) for adsorbent surface energies sampling the observable range of water wettability. Adsorbent capacity expressed as either mass-or-moles per-unit-adsorbent-area increases with p...

Introduction: There are different methods for removal of cadmium from aqueous solutions. Adsorption based methods are among the bests. One of the most important aspects for adsorption techniques is the availability of an accessible and economical adsorbent. This study aims to investigate cadmium removal from aqueous solutions by walnuts shell waste. Materials and Methods: Walnut Shell (WS) was...

The present study was conducted for the removal of color of pulp and paper mill effluent using coal fly ash as an adsorbent. The effect of adsorbent dose and pH on color removal has been determined. 100 % color removal was achieved when adsorbent dose was 2.4 gm or more and at pH 6.8 and above. Jr. of Industrial Pollution Control 24 (1)(2008) pp 1-8 © Enviromedia Printed in India. All rights re...

An Adsorbent based treatment system is presented for toxic metal removal from rinsewater streams. The adsorbent is a Mg-A1 oxide anion exchange material with high capacity (approaching 5.5 meq/g) and strong selectivity for difficult to treat species such as Electroless plating metal chelates, Fixed Cyanides and chrome conversion solutions. Data is presented describing treatment of various metal...