To measure stiffness of the compacted pavement, practitioners use the Compaction Meter Value (CMV); a ratio between the amplitude for the first harmonic of the compactor’s acceleration and the amplitude corresponding to the vibration frequency. Numerous experiments show that CMV is highly correlated with the pavement stiffness, but as of now, there is no convincing theoretical explanation for t...

in order to improve the efficiency of irrigation systems and investigate their impact on the pest population levels, furrow and sprinkler irrigation systems were compared in sugar beet fields. in this study, three different fields were chosen and irrigated by one of the furrow, classic and center pivot irrigation systems.  in each field, 20 plots were randomly selected of which 10 plots were ma...

in this work, effects of homogenization time of 3 to 13 h at 1200 °c on the grain refinement of as-cast aisi 301 stainless steel after different hot rolling conditions were investigated. the results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °c for 9 h followed by hot rolling at temperature range of 1000–1200 °c with strain of 0.8 and strai...

Winter is a very important period during the dairying calendar. Regions such as Southland, with susceptible soils and extended periods with soils at saturation levels will face increasing pressure to review wintering practices. On-farm options for wintering cows to protect soils and prevent pasture damage are needed. This requires a turn-around in philosophy from taking cows to pasture/crops, t...

We consider the two{dimensional compaction problem for orthogonal grid drawings in which the task is to alter the coordinates of the vertices and edge segments while preserving the shape of the drawing so that the total edge length is minimized. The problem is closely related to two{dimensional compaction in vlsi{design and is conjectured to be NP{hard. We characterize the set of feasible solut...

Infiltration is one of the most important hydraulic parameters affecting surface irrigation and one ofthe most difficult parameters in practical field determinations. The infiltration equations are used todescribe water flow hydraulics and surface irrigation systems design. But determination of theparameters in these equations are costly and time consuming. Therefore, some estimating methods ar...

Stress-induced phase transitions(B2-Llo, B2-fcc) on an FeRh alloy were investigated with X-ray diffraction (XRD) and transmission electron microscopy(TEM). An Fe-SO.Sat%Rh alloy was rolled to 80pm thickness, and annealed at 1370K for 173ks. Annealed sample sheets were cold rolled at various rolling rates, and changes of the sample alloy on the phase state were investigated with XRD. The L lo ph...