objectives: the aim of this study was to assess and compare the characteristics of commonly used initial archwires by their load deflection graphs. materials and methods : this study tested three wire designs namely copper nickel titanium (cnt), nickel titanium (niti), and multi-strand niti (msnt) archwires engaged in passive self-ligating (psl) brackets, active self-ligating (asl) brackets or ...

In this paper the effect of corrugated diaphragm on performance of MEMS microphone is described. The corrugated diaphragm is modeled in order to improve the sensitivity of micromachined silicon acoustic sensor. Analytical analyzes have been carried out to derive mathematic expressions for the mechanical sensitivity and displacement of corrugated diaphragm with residual stress. It is shown that ...

We present the design, fabrication and measurement results of a comb-driven electrostatic scanning micromirror. Instead of a conventional micromirror having uniform thickness across the entire reflective surface, a diaphragm mirror plate supported by an array of diamond-shaped frame structures is fabricated monolithically. The fabrication process is a simple sequence of silicon deep etch proces...

The PressureSense Glow Plug combines a miniature fiber optic-based cylinder pressure sensor with the automotive glow plug. The 1.7mm diameter sensor is sealed inside a glow plug heater and the sensor signal conditioner is encapsulated into a “smart connector”. The sensor operates on the proven principle of light intensity changes, transmitted by two optical fibers, upon reflection from a deflec...

Nine Degrees of Freedom (9 DOF) systems are already in development in many areas. In this paper, an integrated pressure sensor is proposed that will make use of an already existing monolithic 9 DOF inertial MEMS platform. Capacitive pressure sensors can suffer from limited sensitivity for a given size of membrane. This novel pressure sensor design increases the sensitivity by over 5 times compa...

Structure of diaphragm was defined as a transverse strengthener beam which located between beams or girders to keep section geometry. It plays significant role provide the stability bridge and distribute vertical axial loads. The main objective this study investigate influence construction concrete diaphragms T-beams at different distances on dynamic static behavior T-beam structure. methodolog...

eventration of the diaphragm is a condition characterized by an attenuated but otherwise intact diaphragm. twenty patients (age range: 2 days to 11 years) were treated for eventration of the diaphragm during a ten year period (19 85-1995). there were 11 girls and 9 boys with a mean gestational age of 37 weeks. 14 patients were born with cephalic presentation, 3 patients with breech delivery and...

The effect of the temperature variation on a unimorph piezoelectric cantilever is studied. Its influences on the thermal expansion, the piezoelectric constant, the transient part and the creep are experimentally analyzed. Afterwards, a H∞ controller is synthesized in order to reject the thermal disturbance and to reach performances required in micromanipulation. Finally, the closed-loop experim...

Abstract: The LC resonator-based passive pressure sensor attracts much attention because it does not need a power source or lead wires between the sensing element and the readout system. This paper presents the design and manufacturing of a passive pressure sensor that contains a variable capacitor and a copper-electroplated planar inductor. The sensor is fabricated using silicon bulk micro-mac...

Described here are efforts to diagnose transient pressures generated by a short-pulse (about 0.5 microseconds) high intensity proton (~ 2 * 10 per pulse) beam. Proton energy is 800-MeV. The tests were performed at the Los Alamos Neutron Science Center Weapons Neutron Research (LANSCE-WNR). Such capability is required for understanding target interaction for the Spallation Neutron Source project...