In this study, by using the finite volume method, the heat transfer in a convective straight fin with temperature-dependent thermal properties and an internal heat generation under multi-boiling heat transfer modes are analyzed. In this regard, the local heat transfer coefficient is considered to vary within a power-law function of temperature. In the present study, the coexistence of all the b...

the performance of a γ-al 2 o 3 /n-decane nanofluid shell-and-tube heat exchanger in a biomass heating plant is analyzed to specify the optimum condition based on the maximum heat transfer rate and performance index for wide range of nanoparticle volume fraction (0–7%). compared with pure          n-decane, the obtained results in this research show that by using γ-al 2 o 3 /n-decane nanofluid ...

if an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. this mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. howeve...

Sets of dry and wet boring experiments are conducted to estimate the amount of heat transferred into the workpiece and the cutting fluid heat convection coefficient in a boring operation by an inverse heat transfer method. The temperature distribution in the bore is predicted using a heat transfer model that includes heat convection on the inner and outer bore walls. The developed model is solv...

Helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. In this kind of heat exchangers, flowand heat transfer are complicated. This paper reports a numerical investigation of theinfluence of different parameters such as coil...

In the present work, heat transfer coefficients (h) along different cooling zones of a continuous caster billet machine were determined during casting of low and medium carbon steels. The effects of casting parameters, such as machine characteristics, the ingot dimension, mold, sprays zones, radiant cooling, melt composition and casting temperature were investigated and correlated with heat tra...

the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

In the Heat Engineering Chair of Poznan University of Technology, there have been investigations carried out for the last 10 years, of heat transfer processes on the wall of a single action internal combustion engine. Investigations of local heat transfer coefficients were carried out in different combustion conditions and the engine was propelled with a methanecarbon dioxide mixture (65% of CH...