This technical report presents the design of a Z-source inverter for an electric bike controller. The objective of this work is to evaluate the potential of using this non-standard inverter topology for a medium power (250W 3kW) motor drive application. The Z-source inverter is able to use the shoot-through state to boost the dc bus voltage, which enables a permanent magnet motor to achieve a h...

In this paper, a new family of single-stage high step-up boost voltage inverter based on transformer is proposed, called T-Z source inverters. By replacing two inductors in the classical Z-source inverter with two transformer, the proposed inverter produces a very high boost voltage gain when, the turn ratio of the transformer is larger than one. Compared to the trans-Z source inverter, the pro...

In this paper, a method is introduced which reduces the harmonicdistortion of the inverter output current, connecting the fuelcell to the AC load. Using FUZZY LOGIC-PI (FLPI), the controllingmethod is engaged in optimum tuning of the PI controllercoefficients of this converter. This converter has only one DC-ACboost inverter and simultaneously has the task of increasingvoltage level and generat...

This paper aims to provide a high performance sensorless control based on an Extended Kalman Filter (EKF) applied to fault-tolerant PMSM drive system with statorresistance estimation. It proposes a fast method of fault switches detection in the power converters. The considered drive is composed of three phases PMSM and a four leg three phase’s inverter when the fourth is the redundant leg. Afte...

 The advent of the transformerless multilevel inverter topology has brought forth various pulse width modulation (PWM) schemes as a means to control the switching of the active devices in each of the multiple voltage levels in the inverter. An analysis of how existing multilevel carrier-based PWM affects switch utilization for the different levels of a diode-clamped inverter is conducted. Two ...

(Abstract) This dissertation aims to present a detailed analysis of the grid voltage disturbance in frequency domain for the current control design in the grid-tie inverter applications and to propose current control techniques in order to minimize its impact and maximize feasibility of the power conditioning system in distributed generations. Because the grid voltage is constantly changing, th...

This paper presents an improved current control strategy for a three-phase grid-connected inverter under distorted grid conditions. In terms of performance, it is important for a grid-connected inverter to maintain the harmonic contents of inverter output currents below the specified limit even when the grid is subject to harmonic distortion. To address this problem, this paper proposes a modul...

with increasing the presence of microgrids (mgs) in the power systems, investigating the mg stability during transient faults is necessary. this study investigates the transient stability analysis of a mg supplied by multiple inverter interfaced distributed generations (iidgs) during fault. the transient stability of a mg is highly depends on the iidgs control strategy. a mg, simulated on matla...

This paper presents a three level NPC LCswitched voltage source inverter. Conventional multilevel voltage source inverter behaves like voltage step down converter. Recently multilevel buck-boost Z-source inverter (ZSI) has been developed for better efficiency and power quality in renewable energy system. The impedance network of the Z-source inverter requires equal inductors and equal capacitor...

This paper presents the three – level neutral point diode clamped inverter is used in a distribution static compensator (DSTATCOM), making use of the multi-level inverter advantages of low harmonics distortion and reduced switching losses. The pulse width modulation (PWM) inverter is employed as DSTATCOM compensating reactive power and eliminates the harmonics drawn from a non-linear load. A fu...