In the present study, small scale effect on critical buckling loads of triangular nano- composite plates under uniform in-plane compression is studied. Since at nano-scale the structure of the plate is discrete, the size dependent nonlocal elasticity theory is employed to develop an equivalent continuum plate model for this nanostructure incorporating the changes in its mechanical behavior. The...

The aim of this study was to fabricate biodegradable poly-L-lactic acid (PLLA) bone screws containing iron oxide (Fe3O4) nanoparticles, which are radiopaque and 3D-printable. The PLLA composites were fabricated by loading 20%, 30%, and 40% Fe3O4 nanoparticles into the PLLA. The physical properties, including elastic modulus, thermal properties, and biocompatibility of the composites were tested...

copper matrix composite reinforced by 1wt.% tib2 particles was prepared using in situ reaction of cu-1.4wt.% ti and cu-0.7wt.% b by rapid solidification and subsequent heat treatment for 1-20 hrs at 900ºc. high-resolution transmission electron microscopy (hrtem) characterization showed that primary tib2 particles were formed in liquid copper. heat treatment of as-solidified samples led to the f...

conducting polymers, because of their special properties, are used to introduce conductive polymeric composites. also, clays have recently been used for preparation of polymer composites with enhanced mechanical and thermal properties. the aim of this work is to study the synergetic effect of the co-presence of conducting polyaniline and montmorillonite in the polyethylene matrix. polyethylene ...

magnesium and its alloys are light, biodegradable, biocompatible metals that have promising applications as biomaterials. magnesium is potentially useful for orthopedic and cardiovascular applications. however, the corrosion rate of this metal is so high that its degradation occurs before the end of the healing process. one of the ways to improve the corrosion rate is to compose it’s with ceram...

Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...

zinc oxide nanoparticles have been synthesized by chemical reaction method.  polyvinyl alcohol (pva) composite film filled with nanometric, monodispersed zinc oxide nano particles prepared by pva solution and nanozinc oxide. polymer blend with zno nanoparticle composite film has prepared by casting technique.  the property of nano composites depends greatly on the chemistry of polymer matrices....

The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

Size-dependent longitudinal and torsional vibrations of nano-beams are examined by two-phase mixture integral elasticity. A new and efficient elastodynamic model is conceived by convexly combining the local phase with strain- and stress-driven purely nonlocal phases. The proposed stress-driven nonlocal integral mixture leads to well-posed structural problems for any value of the scale parameter...

Sandwich beams comprising identical face sheets and a square honeycomb core were manufactured from carbon fiber composite sheets. Analytical expressions were derived for four competing collapse mechanisms of simply supported and clamped sandwich beams in three-point bending: core shear, face microbuckling, face wrinkling, and indentation. Selected geometries of sandwich beams were tested to ill...