In the present work, FGM shells integrated with magnetostrictive layers acting as distributed sensors and actuators are modeled to control vibration attenuation of FGM shells with simply supported boundaryconditions. To achieve a mechanism for actively control of the oscillation amplitude of the integrated structure, a negative velocity proportional feedback control law is implemented in the st...

An advantage of functionally graded materials (FGMs) over laminated composites is that material properties vary continuously in an FGM but are discontinuous across adjoining layers in laminated composites. Furthermore, in an FGM material, properties can be graded in all three directions which is more difficult to achieve in laminated composites. FGMs have been used for structural optimization, ...

Shear stresses are always present during quasi-static strain imaging, since tissue slippage occurs along the lateral and elevational directions during an axial deformation. Shear stress components along the axial deformation axes add to the axial deformation while perpendicular components introduce both lateral and elevational rigid motion and deformation artifacts into the estimated axial and ...

In order to image the shear modulus in soft tissue, for medical diagnosis, given one component of measured displacements as a function of time on an imaging plane, two related direct finite element-based inversion algorithms are presented. One algorithm is based on the governing equations expressed in the frequency domain, and the other is in the time domain. The algorithms consider the complet...

The paper presents a FE-analysis of a spontaneous shear localization inside non-cohesive sand during plane strain compression. The calculations were carried out with a gradient-enhanced hypoplastic constitutive law. The hypoplastic law can reproduce essential features of granular bodies depending on the void ratio, pressure level and deformation direction. To model the thickness of shear zones,...

In this paper, the behavior of free vibrations and buckling of the sandwich panel with a flexible core was investigated using a new improved ‎high-order sandwich panel theory. In this theory, equations of motion were formulated based on shear stresses in the core. First-order shear deformation theory was ‎applied for the procedures. In this theory, for the first time, incompatibility problem of...

Buckling analysis of a functionally graded (FG) nanobeam resting on two-parameter elastic foundation is presented based on third-order shear deformation beam theory (TOSDBT). The in-plane displacement of TOSDBT has parabolic variation through the beam thickness. Also, TOSDBT accounts for shear deformation effect and verifies stress-free boundary conditions on upper and lower faces of FG nanobea...

Porous materials are lightweight, flexible and resistant to hairline cracks, so today with the development of technology porous structure produced for use in various industries. This structure widely use in beams, plates and shells. The purpose of this paper is to investigate the effect of porosity in axial symmetry in bending and buckling load sheet for analysis. For this purpose, a circular p...

PST TiAl crystals oriented such that the deformation axis lies in the (111) interfacial planes have been deformed in compression. This deformation produces so-called "channeled flow" in which the strain perpendicular to the (111) interfaces is zero, while the other two strains are equal and opposite in sign. Thus the sample simply shortens axially and spreads laterally in the channels defined b...